topic Re: HTTP and PDM problem on Pix 520 firewall in Network Security

HTTP and PDM problem on Pix 520 firewall

joseph_samaha — Fri, 21 Feb 2020 06:49:00 GMT

I have a pix 520 firewall(6.1(4) ver), pdm and http are enabled, i just can't access the pix through HTTP( http://ipaddress) neither the pdm (https://ipaddress),having the the knowledge that i have a pix 515 working fine with pdm and http), is there any workaround?

B Regards

Joseph

Re: HTTP and PDM problem on Pix 520 firewall

dnatale — Tue, 24 Jun 2003 09:56:20 GMT

I've had a similiar problem. Open your browser, go to --> Tools --> Internet Options, --> Connections --> LAN Settings. There you must disable the option "use a proxy server". Confirm with ok then enter your Firewalls IP in the

address field (https://xxx.xxx.xxx.xxx)

The passwort is your enable password.

I hope this hint could solve your problem.

Dario

Re: HTTP and PDM problem on Pix 520 firewall

mostiguy — Tue, 24 Jun 2003 10:07:38 GMT

what does a "show http" do?

you need to see:

http server enabled

and netblocks that are allowed to connect to it, and the interfaces which they are on:

192.168.0.0 255.255.255.0 inside