topic Problem with PIX static command in Network Security

Problem with PIX static command

tfathi — Fri, 21 Feb 2020 06:43:17 GMT

I have PIX 515 with Software ver 6.2 I use the static command to map an internal server to outside real IP :

static (inside,outside) x.x.x.x 192.168.10.10 netmask 255.255.255.255 0 1

with access-list as follows:

access-list 101 permit ip any host x.x.x.x

access-group 101 in interface outside

the connection is established from outside but one of the services in the server doesn't work although other services work

can any body help me with that ??

Re: Problem with PIX static command

gfullage — Sun, 04 May 2003 23:26:05 GMT

Can you connect to this service from the inside of the PIX? What do you see when it "doesn't work"? What "doesn't work" exactly? Have you enabled syslog's on the PIX and see if anything is denied through the PIX when you try to connect to this service?

Re: Problem with PIX static command

mike.scaggs — Wed, 07 May 2003 19:41:42 GMT

Your embryonic connections is only set to 1, try this

static (inside,outside) x.x.x.x 192.168.10.10 netmask 255.255.255.255 0 1000

Let me know...........