topic Re: PIX 6.3: dhcprelay multiple client interfaces? in Network Security https://community.cisco.com/t5/network-security/pix-6-3-dhcprelay-multiple-client-interfaces/m-p/173531#M606791 <HTML><HEAD></HEAD><BODY><P>Yep, that should be OK, just make sure you have a DHCP scope for both the inside and dmz subnets on your DHCP server, plus a route from the DHCP server back to both the inside and dmz subnets that points to the PIX outside interface.</P></BODY></HTML> Thu, 17 Apr 2003 03:28:05 GMT gfullage 2003-04-17T03:28:05Z PIX 6.3: dhcprelay multiple client interfaces? https://community.cisco.com/t5/network-security/pix-6-3-dhcprelay-multiple-client-interfaces/m-p/173530#M606790 <P>Hi All,</P><P></P><P>Does anyone know if you can specify multiple client interfaces? ie:</P><P>dhcprelay server 10.1.1.1 outside </P><P>dhcprelay enable inside </P><P>dhcprelay enable dmz</P><P></P><P>ie listen on inside and dmz and forward requests to outside dhcpd?</P><P></P><P>cheers</P><P>dave</P> Fri, 21 Feb 2020 06:41:51 GMT https://community.cisco.com/t5/network-security/pix-6-3-dhcprelay-multiple-client-interfaces/m-p/173530#M606790 davecs 2020-02-21T06:41:51Z Re: PIX 6.3: dhcprelay multiple client interfaces? https://community.cisco.com/t5/network-security/pix-6-3-dhcprelay-multiple-client-interfaces/m-p/173531#M606791 <HTML><HEAD></HEAD><BODY><P>Yep, that should be OK, just make sure you have a DHCP scope for both the inside and dmz subnets on your DHCP server, plus a route from the DHCP server back to both the inside and dmz subnets that points to the PIX outside interface.</P></BODY></HTML> Thu, 17 Apr 2003 03:28:05 GMT https://community.cisco.com/t5/network-security/pix-6-3-dhcprelay-multiple-client-interfaces/m-p/173531#M606791 gfullage 2003-04-17T03:28:05Z