topic PIX as a PPTP Client? in Network Security https://community.cisco.com/t5/network-security/pix-as-a-pptp-client/m-p/170320#M608087 <P>Can the PIX (Ver6.2) be used as a PPTP client to connect to a MS server and thereby sharing the VPN connection using 1 IP address? I currently have MS Clients passing through the PIX to a MS server and all is working well until I run out of IP addresses to assign to "inside" clients.</P><P>Thanks, </P><P>--Matt</P> Fri, 21 Feb 2020 06:37:38 GMT matt.richter 2020-02-21T06:37:38Z PIX as a PPTP Client? https://community.cisco.com/t5/network-security/pix-as-a-pptp-client/m-p/170320#M608087 <P>Can the PIX (Ver6.2) be used as a PPTP client to connect to a MS server and thereby sharing the VPN connection using 1 IP address? I currently have MS Clients passing through the PIX to a MS server and all is working well until I run out of IP addresses to assign to "inside" clients.</P><P>Thanks, </P><P>--Matt</P> Fri, 21 Feb 2020 06:37:38 GMT https://community.cisco.com/t5/network-security/pix-as-a-pptp-client/m-p/170320#M608087 matt.richter 2020-02-21T06:37:38Z Re: PIX as a PPTP Client? https://community.cisco.com/t5/network-security/pix-as-a-pptp-client/m-p/170321#M608088 <HTML><HEAD></HEAD><BODY><P>No, the PIX is only a PPTP server. Even if it was a PPTP client, what you're trying to do (similar to a LAN-to-LAN IPSec tunnel) is not possible with PPTP.</P><P></P><P>Version 6.3 of the PIX code, due out in the next two weeks or so, allows PPTP with PAT, so you won't need a valid global address for each of your internal machines, they'll be able to all use the one address.</P></BODY></HTML> Tue, 18 Mar 2003 00:58:39 GMT https://community.cisco.com/t5/network-security/pix-as-a-pptp-client/m-p/170321#M608088 gfullage 2003-03-18T00:58:39Z