topic Re: PIX: Selective ACL Logging in Network Security https://community.cisco.com/t5/network-security/pix-selective-acl-logging/m-p/128521#M608632 <HTML><HEAD></HEAD><BODY><P>Not possible at the moment. v6.3 code due out late March/early April will have this functionality, you'll have to wait till then.</P></BODY></HTML> Wed, 05 Mar 2003 01:49:26 GMT gfullage 2003-03-05T01:49:26Z PIX: Selective ACL Logging https://community.cisco.com/t5/network-security/pix-selective-acl-logging/m-p/128520#M608631 <P>I am looking for a way to specifically filter/limit syslog messages generated from a PIX. Given the following list:</P><P></P><P>ACL 1) access-list ACL_NAME deny tcp HOST_A HOST_B eq TCP_PORT</P><P>ACL 2) access-list ACL_NAME permit tcp any WEBSERVER eq 80</P><P>ACL 3) access-list ACL_NAME deny any any</P><P></P><P>I would like to be able to recieve all logs generated by ACL 2 and ACL 3, but not receive logs generated by ACL 1. </P><P></P><P>ACL 1 is extremely noisy, and is known to be caused by misconfigured hosts beyond my control. </P><P></P><P>With IOS ACLs I have the option to selectively log ACLs, but I can find no such option within the PIX command set.</P><P></P><P>Does anybody have any ideas?</P><P></P><P>Thank You,</P><P></P><P>TM</P> Fri, 21 Feb 2020 06:36:05 GMT https://community.cisco.com/t5/network-security/pix-selective-acl-logging/m-p/128520#M608631 ThorsonMacAoidh 2020-02-21T06:36:05Z Re: PIX: Selective ACL Logging https://community.cisco.com/t5/network-security/pix-selective-acl-logging/m-p/128521#M608632 <HTML><HEAD></HEAD><BODY><P>Not possible at the moment. v6.3 code due out late March/early April will have this functionality, you'll have to wait till then.</P></BODY></HTML> Wed, 05 Mar 2003 01:49:26 GMT https://community.cisco.com/t5/network-security/pix-selective-acl-logging/m-p/128521#M608632 gfullage 2003-03-05T01:49:26Z