topic Conversion concentrator to PIX - long in Network Security https://community.cisco.com/t5/network-security/conversion-concentrator-to-pix-long/m-p/177176#M609229 <P>How would I conver the following into "pix language"</P><P>inheritance=1</P><P>authprotocol=2</P><P>authalgorithm=2</P><P>authkeysize=128</P><P>encrprotocol=2</P><P>encralgorithm=4</P><P>encrkeysize=168</P><P>compression=2</P><P>lifetimemode=1</P><P>lifetimekbytes=10000</P><P>lifetimeseconds=28800</P><P>gatewayaddress=</P><P>ikephase1mode=2</P><P>ikeauthmode=1</P><P>ikeauthalgorithm=2</P><P>ikeencralgorithm=2</P><P>ikelifetimemode=1</P><P>ikelifetimekbytes=10000</P><P>ikelifetimeseconds=86400</P><P>ikecerthandle=0</P><P>ikecertpathenab=1</P><P>ikedhgroup=2</P><P>ipsecencapmode=2</P><P>pfsdhgroup=1</P><P>replayprotection=2</P><P>ikeproposal=1 </P><P>Is there anything else I require for the tunnel</P><P></P> Fri, 21 Feb 2020 06:34:09 GMT dawsonpa 2020-02-21T06:34:09Z Conversion concentrator to PIX - long https://community.cisco.com/t5/network-security/conversion-concentrator-to-pix-long/m-p/177176#M609229 <P>How would I conver the following into "pix language"</P><P>inheritance=1</P><P>authprotocol=2</P><P>authalgorithm=2</P><P>authkeysize=128</P><P>encrprotocol=2</P><P>encralgorithm=4</P><P>encrkeysize=168</P><P>compression=2</P><P>lifetimemode=1</P><P>lifetimekbytes=10000</P><P>lifetimeseconds=28800</P><P>gatewayaddress=</P><P>ikephase1mode=2</P><P>ikeauthmode=1</P><P>ikeauthalgorithm=2</P><P>ikeencralgorithm=2</P><P>ikelifetimemode=1</P><P>ikelifetimekbytes=10000</P><P>ikelifetimeseconds=86400</P><P>ikecerthandle=0</P><P>ikecertpathenab=1</P><P>ikedhgroup=2</P><P>ipsecencapmode=2</P><P>pfsdhgroup=1</P><P>replayprotection=2</P><P>ikeproposal=1 </P><P>Is there anything else I require for the tunnel</P><P></P> Fri, 21 Feb 2020 06:34:09 GMT https://community.cisco.com/t5/network-security/conversion-concentrator-to-pix-long/m-p/177176#M609229 dawsonpa 2020-02-21T06:34:09Z Re: Conversion concentrator to PIX - long https://community.cisco.com/t5/network-security/conversion-concentrator-to-pix-long/m-p/177177#M609230 <HTML><HEAD></HEAD><BODY><P>Seems that you are trying to configure a VPN tunnel between a Concentrator and a PIX. Well, to learn how to do that, the best place would be to see the PIX support page. The same can be reached by going to Cisco.com-&gt; Technical Support -&gt; Hardware Support -&gt; Security &amp; VPN Devices -&gt; PIX 500 Series Firewalls. See the Software Configuration section. It has a number of documents dealing with the subject of setting up VPN tunnels between PIX and the VPN Concentrator.</P></BODY></HTML> Tue, 25 Feb 2003 16:16:21 GMT https://community.cisco.com/t5/network-security/conversion-concentrator-to-pix-long/m-p/177177#M609230 p.krane 2003-02-25T16:16:21Z