topic PIX logging (define filters) in Network Security https://community.cisco.com/t5/network-security/pix-logging-define-filters/m-p/296876#M610456 <P>Hi !</P><P></P><P>is it possible to define logging filters on the real-time logging of the pix firewall ?</P><P></P><P>"logging monitor 4" shows TOO much entries - I`d like to see ONLY entries for specific SRC or DST addresses like the SMART VIEW TRACKER on a Checkpoint Firewall does.</P><P></P><P>Thx in advance</P><P>Hans</P> Fri, 21 Feb 2020 07:08:45 GMT schimekh 2020-02-21T07:08:45Z PIX logging (define filters) https://community.cisco.com/t5/network-security/pix-logging-define-filters/m-p/296876#M610456 <P>Hi !</P><P></P><P>is it possible to define logging filters on the real-time logging of the pix firewall ?</P><P></P><P>"logging monitor 4" shows TOO much entries - I`d like to see ONLY entries for specific SRC or DST addresses like the SMART VIEW TRACKER on a Checkpoint Firewall does.</P><P></P><P>Thx in advance</P><P>Hans</P> Fri, 21 Feb 2020 07:08:45 GMT https://community.cisco.com/t5/network-security/pix-logging-define-filters/m-p/296876#M610456 schimekh 2020-02-21T07:08:45Z Re: PIX logging (define filters) https://community.cisco.com/t5/network-security/pix-logging-define-filters/m-p/296877#M610457 <HTML><HEAD></HEAD><BODY><P>I do not think filtering the events appearing on the console is possible beyond specifying the syslog level (logging console <LEVEL>). Also, if the console is being swamped by a particular message, you could disable it using the command "no logging message syslog_id". That will give you fewer entries to fish through. What you could also do is to push the log messages to a syslog server and then generate specific reports as per your requirements.</LEVEL></P></BODY></HTML> Mon, 15 Dec 2003 16:56:09 GMT https://community.cisco.com/t5/network-security/pix-logging-define-filters/m-p/296877#M610457 jsivulka 2003-12-15T16:56:09Z