topic Re: Failover PIX in Network Security https://community.cisco.com/t5/network-security/failover-pix/m-p/218422#M612173 <HTML><HEAD></HEAD><BODY><P>This should explain....</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/warp/public/110/failover.html" target="_blank">http://www.cisco.com/warp/public/110/failover.html</A></P></BODY></HTML> Mon, 13 Oct 2003 14:45:55 GMT thisisshanky 2003-10-13T14:45:55Z Failover PIX https://community.cisco.com/t5/network-security/failover-pix/m-p/218419#M612170 <P>Hi folks!, quick question........... i have a PIX 520 to play with. I was wondering, if it's possible to do failover with a lower model like a 515?</P><P></P><P>many thanks</P><P></P> Fri, 21 Feb 2020 07:02:15 GMT https://community.cisco.com/t5/network-security/failover-pix/m-p/218419#M612170 oalexis 2020-02-21T07:02:15Z Re: Failover PIX https://community.cisco.com/t5/network-security/failover-pix/m-p/218420#M612171 <HTML><HEAD></HEAD><BODY><P>nope. must be identical</P></BODY></HTML> Sat, 11 Oct 2003 13:06:37 GMT https://community.cisco.com/t5/network-security/failover-pix/m-p/218420#M612171 mostiguy 2003-10-11T13:06:37Z Re: Failover PIX https://community.cisco.com/t5/network-security/failover-pix/m-p/218421#M612172 <HTML><HEAD></HEAD><BODY><P>When doing failover on a PIX both PIX's need to be the same hardware spec and have the same level of software running. So if you wanted to configure your 520 for failover you would need to have another 520 with the same software level and any additional hardware, i.e. if you have an additional ethernet ports for a DMZ in your primary PIX you would need the same in the failover.</P></BODY></HTML> Mon, 13 Oct 2003 13:47:54 GMT https://community.cisco.com/t5/network-security/failover-pix/m-p/218421#M612172 p.mcgowan 2003-10-13T13:47:54Z Re: Failover PIX https://community.cisco.com/t5/network-security/failover-pix/m-p/218422#M612173 <HTML><HEAD></HEAD><BODY><P>This should explain....</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/warp/public/110/failover.html" target="_blank">http://www.cisco.com/warp/public/110/failover.html</A></P></BODY></HTML> Mon, 13 Oct 2003 14:45:55 GMT https://community.cisco.com/t5/network-security/failover-pix/m-p/218422#M612173 thisisshanky 2003-10-13T14:45:55Z Re: Failover PIX https://community.cisco.com/t5/network-security/failover-pix/m-p/218423#M612174 <HTML><HEAD></HEAD><BODY><P>THanks for the info guys!........you all were quite helpful!</P><P></P><P>many thanks again</P></BODY></HTML> Tue, 14 Oct 2003 00:40:34 GMT https://community.cisco.com/t5/network-security/failover-pix/m-p/218423#M612174 oalexis 2003-10-14T00:40:34Z