topic Re: VPN Client in Network Security

VPN Client

HMidkiff — Mon, 11 Mar 2019 18:31:48 GMT

I just upgraded to an ASA5520. More or less everything has been going well. I have a user in a SOHO with a small home network. On his laptop once he enables his VPN he can not access his laptops printer or RDP into it. I have split tunneling enabled. I am not sure why this is happening?

Re: VPN Client

manish arora — Fri, 27 Aug 2010 21:57:24 GMT

Seems like his soho network and you vpn local pool are on same

rfc 1918 subnet.

Thanks

Manish

Re: VPN Client

HMidkiff — Fri, 27 Aug 2010 22:45:37 GMT

Manish:

Thanks for replying to me post.

I thought the same thing. His SOHO network is 192.168.11.0.24 and the VPN is 10.2.200.0/24. I am very puzzled by it. I am going to try and recreate it in a lab.

Harrison

Re: VPN Client

Yudong Wu — Fri, 27 Aug 2010 22:48:09 GMT

take a look at the following link.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702992.shtml

Re: VPN Client

manish arora — Fri, 27 Aug 2010 22:59:51 GMT

Check for following command in your configuration under the group policy attributes then :-

split-tunnel-policy excludespecified

split-tunnel-network-list value local-access

also need an access list for this :-

access-list local-access standard permit host 0.0.0.0

hope it helps

Thanks

Manish

Re: VPN Client

terrygwazdosky — Sat, 28 Aug 2010 12:21:36 GMT

Just a shot in the dark, but does the user have the "allow local lan access" box checked on his VPN client?