topic Re: Static NAT with Port Address Translation in Network Security

Static NAT with Port Address Translation

reseauiq2010 — Mon, 11 Mar 2019 18:28:43 GMT

Hi all!

I have static IP (outside). Let's say it is 69.70.90.90.

But it doesn't seems to woks. How I do this?

Jitendriya Athavale — Fri, 20 Aug 2010 16:34:28 GMT

this is what you need if you are running 8.2 and prior

static (inside,outside) tcp 69.70.90.90 8080 192.168.1.2 443

so basically the first field is translated and second is real

Nagaraja Thanthry — Fri, 20 Aug 2010 16:36:07 GMT

Hello,

Please try the following:

static (inside,outside) tcp 69.70.90.90 8080 192.l68.1.2 443 netmask

255.255.255.255

access-list outside_access_in permit tcp any host 69.70.90.90 eq 8080

access-group outside_access_in in interface outside

If you already have an access-list, then you can append that access-list

with the new line. Also, if 69.70.90.90 is the interface IP address, you

need to use the "interface" keyword instead of the address.

static (inside,outside) tcp interface 8080 192.l68.1.2 443 netmask

255.255.255.255

access-list outside_access_in permit tcp any interface outside eq 8080

Hope this helps.

Regards,