topic Re: Pix -- Routing between 2 logical dot1q-based interfaces in Network Security https://community.cisco.com/t5/network-security/pix-routing-between-2-logical-dot1q-based-interfaces/m-p/192548#M616020 <HTML><HEAD></HEAD><BODY><P>Yes, it is possible. The PIX Firewall interconnects VLANs, while providing firewall services.</P></BODY></HTML> Wed, 25 Jun 2003 20:58:16 GMT david.benes 2003-06-25T20:58:16Z Pix -- Routing between 2 logical dot1q-based interfaces https://community.cisco.com/t5/network-security/pix-routing-between-2-logical-dot1q-based-interfaces/m-p/192547#M616019 <P>Hi Experts.</P><P></P><P>As far as I know, a Pix Firewall is not able to route a packet coming in from an interface to the same interface.</P><P>But what about two logical dot1q-based interfaces configured on the same physical interface?</P><P>Is it able to route between them?</P><P></P><P>Thank you</P><P>michele</P> Fri, 21 Feb 2020 06:49:11 GMT https://community.cisco.com/t5/network-security/pix-routing-between-2-logical-dot1q-based-interfaces/m-p/192547#M616019 m.laporta 2020-02-21T06:49:11Z Re: Pix -- Routing between 2 logical dot1q-based interfaces https://community.cisco.com/t5/network-security/pix-routing-between-2-logical-dot1q-based-interfaces/m-p/192548#M616020 <HTML><HEAD></HEAD><BODY><P>Yes, it is possible. The PIX Firewall interconnects VLANs, while providing firewall services.</P></BODY></HTML> Wed, 25 Jun 2003 20:58:16 GMT https://community.cisco.com/t5/network-security/pix-routing-between-2-logical-dot1q-based-interfaces/m-p/192548#M616020 david.benes 2003-06-25T20:58:16Z