topic Sample PIX and Router connected to INternet in Network Security https://community.cisco.com/t5/network-security/sample-pix-and-router-connected-to-internet/m-p/121229#M616766 <P>Dear ciscoer,</P><P></P><P>Any sample config PIX connected to the Internet with Router. The router using the IP legal and router's ethernet 0 using 192.168.0.xxx. PIX ethernet0 using 192.168.0.xxx and the PIX's ethernet1 192.168.1.xxx. Where should I NAT the IP legal from ISP.</P><P></P><P>LAN(192.168.1.xxx)</P><P> |</P><P> |</P><P>PIX Inside (192.168.1.xxx)</P><P> |</P><P>PIX Outside (192.168.0.xxx)</P><P> |</P><P> |</P><P>Router Ethernet 0 (192.168.0.xxx)</P><P> |</P><P>Router Serial 0 (202.xxx.xxx.xxx)</P><P></P><P>Thank YOu In Advance</P><P></P><P>HATO</P><P></P><P></P> Fri, 21 Feb 2020 06:46:45 GMT j.hato 2020-02-21T06:46:45Z Sample PIX and Router connected to INternet https://community.cisco.com/t5/network-security/sample-pix-and-router-connected-to-internet/m-p/121229#M616766 <P>Dear ciscoer,</P><P></P><P>Any sample config PIX connected to the Internet with Router. The router using the IP legal and router's ethernet 0 using 192.168.0.xxx. PIX ethernet0 using 192.168.0.xxx and the PIX's ethernet1 192.168.1.xxx. Where should I NAT the IP legal from ISP.</P><P></P><P>LAN(192.168.1.xxx)</P><P> |</P><P> |</P><P>PIX Inside (192.168.1.xxx)</P><P> |</P><P>PIX Outside (192.168.0.xxx)</P><P> |</P><P> |</P><P>Router Ethernet 0 (192.168.0.xxx)</P><P> |</P><P>Router Serial 0 (202.xxx.xxx.xxx)</P><P></P><P>Thank YOu In Advance</P><P></P><P>HATO</P><P></P><P></P> Fri, 21 Feb 2020 06:46:45 GMT https://community.cisco.com/t5/network-security/sample-pix-and-router-connected-to-internet/m-p/121229#M616766 j.hato 2020-02-21T06:46:45Z Re: Sample PIX and Router connected to INternet https://community.cisco.com/t5/network-security/sample-pix-and-router-connected-to-internet/m-p/121230#M616837 <HTML><HEAD></HEAD><BODY><P>Hi Hato, </P><P></P><P>You could do NAT 0 on the pix and have the edge router do the NATing for you. This would be the simplest way to get it working. </P><P>Other option is to configure PPPoE. Below link is the FAQ for the PIX configuration. </P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html" target="_blank">http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html</A> </P><P></P><P>Thanks, </P><P>yatin</P></BODY></HTML> Tue, 03 Jun 2003 13:13:03 GMT https://community.cisco.com/t5/network-security/sample-pix-and-router-connected-to-internet/m-p/121230#M616837 ywadhavk 2003-06-03T13:13:03Z