topic Re: pix and routing inside in Network Security https://community.cisco.com/t5/network-security/pix-and-routing-inside/m-p/186045#M618172 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>indeed you will need an interal router to do the routing. The pix is not able to do this.</P><P></P><P>Kind Regards,</P><P>Tom</P></BODY></HTML> Tue, 17 Dec 2002 22:20:22 GMT tvanginneken 2002-12-17T22:20:22Z pix and routing inside https://community.cisco.com/t5/network-security/pix-and-routing-inside/m-p/186044#M618161 <P>It is my understanding that you can NOT use the PIX to route between two subnets connected on the same inside interface. </P><P></P><P>The PIX will not take receive packets and send them out the same interface that it receives them on. </P><P>In other words, the PIX will not route for you.</P><P>You will need a "router" to actually do this on the inside of the network prior to packets arriving at the inside interface of the PIX. </P><P></P><P>I believe that this has always been the case and, to date, remains unchanged.</P><P>Just looking for corooboration....thanks for any input</P> Fri, 21 Feb 2020 06:26:19 GMT https://community.cisco.com/t5/network-security/pix-and-routing-inside/m-p/186044#M618161 pcanters 2020-02-21T06:26:19Z Re: pix and routing inside https://community.cisco.com/t5/network-security/pix-and-routing-inside/m-p/186045#M618172 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>indeed you will need an interal router to do the routing. The pix is not able to do this.</P><P></P><P>Kind Regards,</P><P>Tom</P></BODY></HTML> Tue, 17 Dec 2002 22:20:22 GMT https://community.cisco.com/t5/network-security/pix-and-routing-inside/m-p/186045#M618172 tvanginneken 2002-12-17T22:20:22Z