topic Re: PIX SNMP in Network Security https://community.cisco.com/t5/network-security/pix-snmp/m-p/88341#M618587 <HTML><HEAD></HEAD><BODY><P>Hans,</P><P></P><P>Have you tried adding the keyword "poll" at the end of your "snmp-server host vlan203 xxx.xxx.203.254" command?</P><P></P><P>According to the command reference</P><P></P><P></P><P>"Specify whether traps, polls, or both are acted upon. Use with these parameters:</P><P></P><P>trap&#151;Only traps will be sent. This host will not be allowed to poll.</P><P></P><P></P><P>poll&#151;Traps will not be sent. This host will be allowed to poll. </P><P></P><P></P><P>The default allows both traps and polls to be acted upon."</P><P></P><P></P><P>So, although polls should be allowed, I would try allowing *only* polls.</P><P></P><P>What version of code are you using on your 525?</P><P></P><P></P><P></P><P>-Bryan</P><P></P></BODY></HTML> Wed, 13 Nov 2002 21:04:47 GMT bosoro 2002-11-13T21:04:47Z PIX SNMP https://community.cisco.com/t5/network-security/pix-snmp/m-p/88340#M618583 <P>Hi !</P><P></P><P>Can anyone tell me how to enable SNMP on a PIX 525 ?</P><P></P><P>I am sitting on VLAN203 and configured the following:</P><P></P><P>snmp-server host vlan203 xxx.xxx.203.254</P><P>snmp-server community x26193RO</P><P>snmp-server enable traps</P><P></P><P>but using "snmpwalk" (from 172.23.203.254) I do NOT get an answer.</P><P></P><P>I do NOT have any access-list in place, yet !</P><P></P><P></P><P>Thx</P><P>Hans</P> Fri, 21 Feb 2020 06:22:21 GMT https://community.cisco.com/t5/network-security/pix-snmp/m-p/88340#M618583 schimekh 2020-02-21T06:22:21Z Re: PIX SNMP https://community.cisco.com/t5/network-security/pix-snmp/m-p/88341#M618587 <HTML><HEAD></HEAD><BODY><P>Hans,</P><P></P><P>Have you tried adding the keyword "poll" at the end of your "snmp-server host vlan203 xxx.xxx.203.254" command?</P><P></P><P>According to the command reference</P><P></P><P></P><P>"Specify whether traps, polls, or both are acted upon. Use with these parameters:</P><P></P><P>trap&#151;Only traps will be sent. This host will not be allowed to poll.</P><P></P><P></P><P>poll&#151;Traps will not be sent. This host will be allowed to poll. </P><P></P><P></P><P>The default allows both traps and polls to be acted upon."</P><P></P><P></P><P>So, although polls should be allowed, I would try allowing *only* polls.</P><P></P><P>What version of code are you using on your 525?</P><P></P><P></P><P></P><P>-Bryan</P><P></P></BODY></HTML> Wed, 13 Nov 2002 21:04:47 GMT https://community.cisco.com/t5/network-security/pix-snmp/m-p/88341#M618587 bosoro 2002-11-13T21:04:47Z