topic Re: Pix error in Network Security

Pix error

benjamin — Fri, 21 Feb 2020 06:16:59 GMT

Do anyone know what is error mean?

ip_get_ports: TCP or UDP packet has no port in header

Do this mean something is wrong with the access-list or IOS???

Re: Pix error

steve.barlow — Wed, 02 Oct 2002 10:45:19 GMT

Can you post the exact error message/number.

Steve

Re: Pix error

benjamin — Wed, 02 Oct 2002 17:35:20 GMT

This is what i got from the syslog and i am using a 515 ios is 5.1(1) and this cose my whole network to be down. And pls help.

Aug 26 04:00:31 172.16.1.1 Aug 26 2002 03:56:44: %PIX-3-211001: Memory allocation Error

Aug 26 04:00:32 172.16.1.1 Aug 26 2002 03:56:45: %PIX-3-211001: Memory allocation Error

Aug 26 04:00:33 172.16.1.1 Aug 26 2002 03:56:46: %PIX-3-211001: Memory allocation Error

THX

Re: Pix error

ccaron — Wed, 02 Oct 2002 17:50:21 GMT

According to Cisco:

%PIX-3-211001: Memory allocation Error

Explanation Failed to allocate RAM system memory.

Action If this message occurs periodically, it can be ignored. If it repeats frequently, contact customer support.

You can always look up the messages in syslog here:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v51/syslog/pixemsgs.htm

So I would recommend calling TAC.

-Chris

Re: Pix error

benjamin — Thu, 03 Oct 2002 01:01:51 GMT

I check that error before but seem that is not link.

ip_get_ports: TCP or UDP packet has no port in header

this error come out from my console port.

Re: Pix error

Nairi Adamian — Thu, 03 Oct 2002 05:01:46 GMT

Looks like you might be running into CSCdr35941.

For more information look up the bug using the following link:

http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl

The bug is fixed in version 5.1(2)

hope this helps,

-Nairi

Re: Pix error

benjamin — Thu, 03 Oct 2002 08:05:24 GMT

Is there any way to stop this bug is make my whole network down.

Please tell me what will be the best way to stop this bug

THX A MILLION

Ben

Re: Pix error

Nairi Adamian — Thu, 03 Oct 2002 10:03:20 GMT

You are running into a bug. The bug is fixed in version 5.1(2). You will need to upgrade the pix version 5.1(2) or later.

Here is the instructions regarding the upgrade:

http://www.cisco.com/warp/public/110/upgrade.shtml

-Nairi