topic Re: 2 subnets through 1 Pix in Network Security https://community.cisco.com/t5/network-security/2-subnets-through-1-pix/m-p/26605#M620052 <HTML><HEAD></HEAD><BODY><P>You can use same (one) PIX for both subnets, just add another NIC and have for eg the admin subnet on ethernet1 and student subnet on ethernet2. </P><P></P><P>Ethernet0 would be your outside connecting to internet.</P><P></P><P>HTH</P><P>R/Yusuf</P></BODY></HTML> Fri, 09 Aug 2002 03:33:03 GMT yusuff 2002-08-09T03:33:03Z 2 subnets through 1 Pix https://community.cisco.com/t5/network-security/2-subnets-through-1-pix/m-p/26604#M620051 <P>We are working with a school district interested in potecting both their Student network as well as the admin network.The two are totally separate(different subnets) except for sharing a switch for internet access. Is it possible for the two networks to share the same PIX? We need NAT translation, VPN capabilities to both networks. Do we to need to add another NIC into the PIX or do I need 2 PIX- 1 for each subnet.</P><P></P><P>Thank you</P><P>David</P> Fri, 21 Feb 2020 06:11:50 GMT https://community.cisco.com/t5/network-security/2-subnets-through-1-pix/m-p/26604#M620051 dkordyban 2020-02-21T06:11:50Z Re: 2 subnets through 1 Pix https://community.cisco.com/t5/network-security/2-subnets-through-1-pix/m-p/26605#M620052 <HTML><HEAD></HEAD><BODY><P>You can use same (one) PIX for both subnets, just add another NIC and have for eg the admin subnet on ethernet1 and student subnet on ethernet2. </P><P></P><P>Ethernet0 would be your outside connecting to internet.</P><P></P><P>HTH</P><P>R/Yusuf</P></BODY></HTML> Fri, 09 Aug 2002 03:33:03 GMT https://community.cisco.com/t5/network-security/2-subnets-through-1-pix/m-p/26605#M620052 yusuff 2002-08-09T03:33:03Z