topic Re: Pix Configuration in Network Security https://community.cisco.com/t5/network-security/pix-configuration/m-p/18628#M620090 <HTML><HEAD></HEAD><BODY><P>not sure what you mean, but yes, you can seperate 2 networks by putting them on different interface on the PIX, eg inside, dmz etc</P><P></P><P>HTH</P><P>R/Yusuf</P></BODY></HTML> Tue, 06 Aug 2002 07:52:03 GMT yusuff 2002-08-06T07:52:03Z Pix Configuration https://community.cisco.com/t5/network-security/pix-configuration/m-p/18627#M620089 <P>One question it is posible to separate 2 networks with a PIX Firewall ...????</P><P>There is not a routers only switches...</P> Fri, 21 Feb 2020 06:11:34 GMT https://community.cisco.com/t5/network-security/pix-configuration/m-p/18627#M620089 J.altami01 2020-02-21T06:11:34Z Re: Pix Configuration https://community.cisco.com/t5/network-security/pix-configuration/m-p/18628#M620090 <HTML><HEAD></HEAD><BODY><P>not sure what you mean, but yes, you can seperate 2 networks by putting them on different interface on the PIX, eg inside, dmz etc</P><P></P><P>HTH</P><P>R/Yusuf</P></BODY></HTML> Tue, 06 Aug 2002 07:52:03 GMT https://community.cisco.com/t5/network-security/pix-configuration/m-p/18628#M620090 yusuff 2002-08-06T07:52:03Z