topic Re: Pix reset in Network Security https://community.cisco.com/t5/network-security/pix-reset/m-p/199282#M625596 <HTML><HEAD></HEAD><BODY><P>Hi, anytime you make a change to an access list, conduit or static, all you need to do is clear the xlate with the command.......clear xlate..</P><P></P><P>You do not need to reboot the PIX.</P><P></P><P>Hope that helps...</P><P></P></BODY></HTML> Mon, 27 Jan 2003 17:53:30 GMT mike-greene 2003-01-27T17:53:30Z Pix reset https://community.cisco.com/t5/network-security/pix-reset/m-p/199281#M625586 <P>Hello All, I'm new to the PIX (Not to firewalls) and I had the following question. </P><P></P><P>After making change to an access list, static (inside,outside) do you need to restart the PIX? If so, do you use the reset command? </P><P></P><P>Thanks </P><P></P> Fri, 21 Feb 2020 06:31:19 GMT https://community.cisco.com/t5/network-security/pix-reset/m-p/199281#M625586 dhoule 2020-02-21T06:31:19Z Re: Pix reset https://community.cisco.com/t5/network-security/pix-reset/m-p/199282#M625596 <HTML><HEAD></HEAD><BODY><P>Hi, anytime you make a change to an access list, conduit or static, all you need to do is clear the xlate with the command.......clear xlate..</P><P></P><P>You do not need to reboot the PIX.</P><P></P><P>Hope that helps...</P><P></P></BODY></HTML> Mon, 27 Jan 2003 17:53:30 GMT https://community.cisco.com/t5/network-security/pix-reset/m-p/199282#M625596 mike-greene 2003-01-27T17:53:30Z Re: Pix reset https://community.cisco.com/t5/network-security/pix-reset/m-p/199283#M625601 <HTML><HEAD></HEAD><BODY><P>Thanks </P><P></P></BODY></HTML> Mon, 27 Jan 2003 17:56:14 GMT https://community.cisco.com/t5/network-security/pix-reset/m-p/199283#M625601 dhoule 2003-01-27T17:56:14Z