topic Re: Message on PIX when using "global" command in Network Security

Message on PIX when using "global" command

mnlatif — Fri, 21 Feb 2020 06:21:31 GMT

Hi,

The following message appeared on PIX, when i used the "global" command

++++++++++++++

Firewall# global (outside) 1 interface

Warning: Start and End addresses overlap with broadcast address.

outside interface address added to PAT pool

++++++++++++++

I am testing the PIX before using it in Production. It seems to be working though, but is this message something to be worried about ?

Only two interfaces are configured with IP Addresses

++++++++++++

ip address outside x.x.x.58 255.255.255.248

ip address inside 172.16.253.46 255.255.0.0

+++++++++++++++

mnlatif — Wed, 06 Nov 2002 17:50:27 GMT

Never mind, its a cosmetic bug "CSCdx64223"

tvanginneken — Wed, 06 Nov 2002 21:26:26 GMT

Hi,

is it possible to post the rest of the config file? I'am wondering what NAT commands are in place.

Regards,

Tom

mnlatif — Wed, 06 Nov 2002 22:34:37 GMT

There were no other NAT commands. Only

nat (inside) 1 .....

As i mentioned before, this bug is mentioned on Cisco's website.