topic pix 520 in Network Security https://community.cisco.com/t5/network-security/pix-520/m-p/43140#M628237 <P>I have a pix 520 is it possible to run it to 2 isps at the same time.</P><P></P><P> Thanks</P><P></P><P> Dennis</P> Fri, 21 Feb 2020 06:05:57 GMT drogell 2020-02-21T06:05:57Z pix 520 https://community.cisco.com/t5/network-security/pix-520/m-p/43140#M628237 <P>I have a pix 520 is it possible to run it to 2 isps at the same time.</P><P></P><P> Thanks</P><P></P><P> Dennis</P> Fri, 21 Feb 2020 06:05:57 GMT https://community.cisco.com/t5/network-security/pix-520/m-p/43140#M628237 drogell 2020-02-21T06:05:57Z Re: pix 520 https://community.cisco.com/t5/network-security/pix-520/m-p/43141#M628238 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>I think you have the wrong forum, but the PIX can have only one default route, so it won't work without running source nat on the upstream routers. This would also only work for incoming connections.</P></BODY></HTML> Wed, 19 Jun 2002 08:34:31 GMT https://community.cisco.com/t5/network-security/pix-520/m-p/43141#M628238 nelassaa 2002-06-19T08:34:31Z