topic Re: Modifying PIX Object-Groups in Network Security https://community.cisco.com/t5/network-security/modifying-pix-object-groups/m-p/153603#M629499 <HTML><HEAD></HEAD><BODY><P>Absolutely. That's why object-groups are so cool. Just add, change, or subtract hosts from the object-group and your access-lists will be updated automatically.</P></BODY></HTML> Wed, 14 May 2003 15:57:16 GMT tbissett 2003-05-14T15:57:16Z Modifying PIX Object-Groups https://community.cisco.com/t5/network-security/modifying-pix-object-groups/m-p/153602#M629489 <P>Once an Object-Group is defined and used in an access-list can the Object-Group be modified without removing the access-list from the interface?</P><P>Sample:</P><P>object-group network OutsideWebServers</P><P> network-object host 10.10.10.10</P><P> network-object host 10.10.10.11</P><P>"access-list Protect_Outside permit tcp any object-group OutsideWebServers eq www"</P><P>"access-group Protect_Outside in interface outside"</P><P>Can I then add another network-object host 10.10.10.12 to the OutsideWebServers group without removing the access-list from the Outside interface?</P> Fri, 21 Feb 2020 06:44:29 GMT https://community.cisco.com/t5/network-security/modifying-pix-object-groups/m-p/153602#M629489 m-saviano 2020-02-21T06:44:29Z Re: Modifying PIX Object-Groups https://community.cisco.com/t5/network-security/modifying-pix-object-groups/m-p/153603#M629499 <HTML><HEAD></HEAD><BODY><P>Absolutely. That's why object-groups are so cool. Just add, change, or subtract hosts from the object-group and your access-lists will be updated automatically.</P></BODY></HTML> Wed, 14 May 2003 15:57:16 GMT https://community.cisco.com/t5/network-security/modifying-pix-object-groups/m-p/153603#M629499 tbissett 2003-05-14T15:57:16Z