topic Pix 6.3 in Network Security https://community.cisco.com/t5/network-security/pix-6-3/m-p/143915#M640005 <P>We are setting up a load balancing design, and I noticed the only routing protocol the Pix supports is RIP. I know in 6.3 it will support OSPF, what about EIGRP? Any information would be extremely helpful so i can anticipate design changes.</P><P></P><P>this is sort of what i am setting up.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk648/tk365/technologies_configuration_example09186a008009487d.shtml" target="_blank">http://www.cisco.com/en/US/tech/tk648/tk365/technologies_configuration_example09186a008009487d.shtml</A></P><P></P><P>Instead of routers, we are using dual 3550s EMI. and we have the 4 Port DMZ card. We are just using 1 unit though, with the failover unit. Using 1 port on the 4 port DMZ to as an incoming port. The outs go to the Load Balancers.</P> Fri, 21 Feb 2020 06:28:56 GMT brianz 2020-02-21T06:28:56Z Pix 6.3 https://community.cisco.com/t5/network-security/pix-6-3/m-p/143915#M640005 <P>We are setting up a load balancing design, and I noticed the only routing protocol the Pix supports is RIP. I know in 6.3 it will support OSPF, what about EIGRP? Any information would be extremely helpful so i can anticipate design changes.</P><P></P><P>this is sort of what i am setting up.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk648/tk365/technologies_configuration_example09186a008009487d.shtml" target="_blank">http://www.cisco.com/en/US/tech/tk648/tk365/technologies_configuration_example09186a008009487d.shtml</A></P><P></P><P>Instead of routers, we are using dual 3550s EMI. and we have the 4 Port DMZ card. We are just using 1 unit though, with the failover unit. Using 1 port on the 4 port DMZ to as an incoming port. The outs go to the Load Balancers.</P> Fri, 21 Feb 2020 06:28:56 GMT https://community.cisco.com/t5/network-security/pix-6-3/m-p/143915#M640005 brianz 2020-02-21T06:28:56Z Re: Pix 6.3 https://community.cisco.com/t5/network-security/pix-6-3/m-p/143916#M640007 <HTML><HEAD></HEAD><BODY><P>The PIX does not support EIGRP. The following gives an explanation for this. <A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/config/subnets.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/config/subnets.htm</A></P></BODY></HTML> Mon, 20 Jan 2003 15:25:55 GMT https://community.cisco.com/t5/network-security/pix-6-3/m-p/143916#M640007 r-simpson 2003-01-20T15:25:55Z Re: Pix 6.3 https://community.cisco.com/t5/network-security/pix-6-3/m-p/143917#M640008 <HTML><HEAD></HEAD><BODY><P>I know pix doesnt support EIGRP now, i was asking about version 6.3.</P></BODY></HTML> Mon, 20 Jan 2003 15:42:10 GMT https://community.cisco.com/t5/network-security/pix-6-3/m-p/143917#M640008 brianz 2003-01-20T15:42:10Z Re: Pix 6.3 https://community.cisco.com/t5/network-security/pix-6-3/m-p/143918#M640010 <HTML><HEAD></HEAD><BODY><P>6.3 will support OSPF. no current plans for EIGRP support.</P></BODY></HTML> Wed, 22 Jan 2003 01:11:29 GMT https://community.cisco.com/t5/network-security/pix-6-3/m-p/143918#M640010 gfullage 2003-01-22T01:11:29Z