topic Re: Telnet Access PIX 6.2(2) Using PPTP in Network Security

Telnet Access PIX 6.2(2) Using PPTP

cadams — Sat, 22 Feb 2020 07:14:02 GMT

Hi,

I would like to be able to telnet to my PIX from the outside connecting via PPTP. I know that I can do this with an IPSEC connection but can I with a PPTP connection, if so where on CCO can I find configuration examples of this?

Thanks in advance,

Chad

Re: Telnet Access PIX 6.2(2) Using PPTP

ajagadee — Mon, 16 Dec 2002 20:30:26 GMT

Hi Chad,

You cannot telnet to the outside interface of the Pix through a PPTP connection and can only telnet through an ipsec tunnel or you can configure SSH if that is an option for you.

Regards,

Arul

Re: Telnet Access PIX 6.2(2) Using PPTP

cadams — Mon, 16 Dec 2002 22:08:43 GMT

Thank you,

Chad

Re: Telnet Access PIX 6.2(2) Using PPTP

srittenberg — Mon, 16 Dec 2002 22:13:18 GMT

You may consider to use ssh, command:

ssh x.x.x.x 255.255.255.255 interface

you may then use something like secureCRT program to ssh to your pix. it's secure and simple.