topic pix 501 to 3030 using dynamic outside ip in Network Security https://community.cisco.com/t5/network-security/pix-501-to-3030-using-dynamic-outside-ip/m-p/174301#M650104 <P>Is it possible to do a lan to lan vpn (ipsec) from a pix 501 using a dynamic ip address on the outside interface. To a cisco 3030 concentrator.</P> Fri, 21 Feb 2020 06:25:52 GMT bbelz 2020-02-21T06:25:52Z pix 501 to 3030 using dynamic outside ip https://community.cisco.com/t5/network-security/pix-501-to-3030-using-dynamic-outside-ip/m-p/174301#M650104 <P>Is it possible to do a lan to lan vpn (ipsec) from a pix 501 using a dynamic ip address on the outside interface. To a cisco 3030 concentrator.</P> Fri, 21 Feb 2020 06:25:52 GMT https://community.cisco.com/t5/network-security/pix-501-to-3030-using-dynamic-outside-ip/m-p/174301#M650104 bbelz 2020-02-21T06:25:52Z Re: pix 501 to 3030 using dynamic outside ip https://community.cisco.com/t5/network-security/pix-501-to-3030-using-dynamic-outside-ip/m-p/174302#M650149 <HTML><HEAD></HEAD><BODY><P>Yep.</P><P></P><P>This shows the config on the VPN3000:</P><P></P><P> <A class="jive-link-custom" href="http://www.cisco.com/warp/public/471/vpn3k_iosdhcp.html" target="_blank">http://www.cisco.com/warp/public/471/vpn3k_iosdhcp.html</A></P><P></P><P>The config on the PIX is just a standard L2L configuration, just make sure the pre-shared key on the PIX matches the Default Pre-Shared Key configured on the 3000 in the Base Group.</P></BODY></HTML> Fri, 13 Dec 2002 00:58:56 GMT https://community.cisco.com/t5/network-security/pix-501-to-3030-using-dynamic-outside-ip/m-p/174302#M650149 gfullage 2002-12-13T00:58:56Z