topic Re: PIX 535 reloads in Network Security https://community.cisco.com/t5/network-security/pix-535-reloads/m-p/18004#M651953 <HTML><HEAD></HEAD><BODY><P>If you plug a terminal into the console, do you see any tracebacks or other messages when it reboots? 100 messages per second will be putting quite a load on the PIX, does a "sho block" command indicate you're running out of memory blocks? </P><P></P><P>If you see a traceback message then open a TAC case and attach this output to the case and the TAC will be able to figure it out for you.</P></BODY></HTML> Sun, 15 Sep 2002 22:52:51 GMT gfullage 2002-09-15T22:52:51Z PIX 535 reloads https://community.cisco.com/t5/network-security/pix-535-reloads/m-p/18003#M651949 <P>The PIX is reloading every day or two at different times. I am running version 6.1.4 with a gig of ram. As far as I can see, the only thing that could be cause the choke is the level of logging. I am currently logging informational to a syslog server. Every second there must be about 100 messages. This bug was known for earlier versions but was supposed to fixed by 6.1.4</P><P></P><P>Is there anyone else with the same issue? </P> Fri, 21 Feb 2020 06:14:49 GMT https://community.cisco.com/t5/network-security/pix-535-reloads/m-p/18003#M651949 kurt.florez 2020-02-21T06:14:49Z Re: PIX 535 reloads https://community.cisco.com/t5/network-security/pix-535-reloads/m-p/18004#M651953 <HTML><HEAD></HEAD><BODY><P>If you plug a terminal into the console, do you see any tracebacks or other messages when it reboots? 100 messages per second will be putting quite a load on the PIX, does a "sho block" command indicate you're running out of memory blocks? </P><P></P><P>If you see a traceback message then open a TAC case and attach this output to the case and the TAC will be able to figure it out for you.</P></BODY></HTML> Sun, 15 Sep 2002 22:52:51 GMT https://community.cisco.com/t5/network-security/pix-535-reloads/m-p/18004#M651953 gfullage 2002-09-15T22:52:51Z