topic Re: Correct procedure to update IOS IPS signatures on 2911 route in Network Security

Correct procedure to update IOS IPS signatures on 2911 router

kasper123 — Tue, 26 Mar 2019 00:19:56 GMT

What is the correct procedure to update the IOS IPS signatures on an 2911 router?

I know how to download the signatures file (eg. IOS-S556-CLI.pkg) but what is the correct way to install the update?

Thank you in advance!

Re: Correct procedure to update IOS IPS signatures on 2911 route

Jennifer Halim — Mon, 25 Apr 2011 02:54:06 GMT

Here is the complete IOS IPS signature documentation:

http://www.cisco.com/en/US/products/ps6634/products_tech_note09186a008097db66.shtml

To update the IOS IPS, please check out Step 5.

Hope this helps.

Re: Correct procedure to update IOS IPS signatures on 2911 route

kasper123 — Tue, 26 Apr 2011 16:33:29 GMT

Hi Jennifer,

thank you for answering the question.

Do you happen to know what is the number of IPS rules that can be enabled on the router without crashing it?

In the instructions it says never to enable all the signatures and enable only the ones that are needed. But what is the number of signatures that a 2911 router can handle?

Regards.

Re: Correct procedure to update IOS IPS signatures on 2911 route

Jennifer Halim — Fri, 29 Apr 2011 00:28:21 GMT

The IPS signature package comes with a list of pre-enabled signatures, hence Cisco does not recommend enabling a lot more other signatures, especially not every single signature as documented.

The reason why is because the package might include retired/old signatures only for references, and not every single signature is required to protect your environment because you might not have the traffic for some signatures, you might not have some end hosts that are written with specific signatures, therefore, it becomes irrelevant if you enable it.

Typically here is how customer would enable/disable signatures:

- Use the default signature that is enabled by Cisco (the default should fit majority of the customers).

- Monitor it for a couple of months

- Disable those that you don't need, and enable others if you think you require it for specific.