topic Re: Multiple NAT pools on PIX in Network Security https://community.cisco.com/t5/network-security/multiple-nat-pools-on-pix/m-p/13112#M654010 <HTML><HEAD></HEAD><BODY><P>This should be ok. NAT(inside) and glodal (outside) global (client) is what you need then a route client ...... statement.</P><P>Here is some guide : <A class="jive-link-custom" href="http://www.cisco.com/warp/customer/707/28.html" target="_blank">http://www.cisco.com/warp/customer/707/28.html</A>.</P><P>Regards,</P><P></P><P></P></BODY></HTML> Mon, 01 Jul 2002 22:50:28 GMT edadios 2002-07-01T22:50:28Z Multiple NAT pools on PIX https://community.cisco.com/t5/network-security/multiple-nat-pools-on-pix/m-p/13111#M654009 <P>I have a PIX with two "external" interfaces (outside and client). All internal connections originate from 10.x.x.x addresses. I need to apply a different NAT pool depending on which external interface is used. (ie 65.120.74.64-65.120.74.254 if heading for the outside interface and 10.4.170.100-10.4.170.254 if heading for the client interface). Is this possible?</P> Fri, 21 Feb 2020 06:07:58 GMT https://community.cisco.com/t5/network-security/multiple-nat-pools-on-pix/m-p/13111#M654009 mshomo 2020-02-21T06:07:58Z Re: Multiple NAT pools on PIX https://community.cisco.com/t5/network-security/multiple-nat-pools-on-pix/m-p/13112#M654010 <HTML><HEAD></HEAD><BODY><P>This should be ok. NAT(inside) and glodal (outside) global (client) is what you need then a route client ...... statement.</P><P>Here is some guide : <A class="jive-link-custom" href="http://www.cisco.com/warp/customer/707/28.html" target="_blank">http://www.cisco.com/warp/customer/707/28.html</A>.</P><P>Regards,</P><P></P><P></P></BODY></HTML> Mon, 01 Jul 2002 22:50:28 GMT https://community.cisco.com/t5/network-security/multiple-nat-pools-on-pix/m-p/13112#M654010 edadios 2002-07-01T22:50:28Z Re: Multiple NAT pools on PIX https://community.cisco.com/t5/network-security/multiple-nat-pools-on-pix/m-p/13113#M654011 <HTML><HEAD></HEAD><BODY><P>That worked. Thank you.</P></BODY></HTML> Tue, 02 Jul 2002 13:59:43 GMT https://community.cisco.com/t5/network-security/multiple-nat-pools-on-pix/m-p/13113#M654011 mshomo 2002-07-02T13:59:43Z