topic number of nameif commands with PIX ? in Network Security https://community.cisco.com/t5/network-security/number-of-nameif-commands-with-pix/m-p/93110#M654182 <P>according to PIX Installation Guide, you can have up to 8 interfaces on a PIX 525 (see Note at URL : <A href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/pix_ig/pix525.htm#xtocid11" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/pix_ig/pix525.htm#xtocid11</A></P><P></P><P></P><P>according to PIX Configuration Guide, you can have up to 6 interfaces defined with the nameif command(no PIX model is specified ,refer following URL and the security level parameter description : <A href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/mr.htm#xtocid3" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/mr.htm#xtocid3</A>)</P><P></P><P>Questions : Can you explain the differences between both documentations ?</P><P></P><P></P> Fri, 21 Feb 2020 06:07:13 GMT admin_2 2020-02-21T06:07:13Z number of nameif commands with PIX ? https://community.cisco.com/t5/network-security/number-of-nameif-commands-with-pix/m-p/93110#M654182 <P>according to PIX Installation Guide, you can have up to 8 interfaces on a PIX 525 (see Note at URL : <A href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/pix_ig/pix525.htm#xtocid11" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/pix_ig/pix525.htm#xtocid11</A></P><P></P><P></P><P>according to PIX Configuration Guide, you can have up to 6 interfaces defined with the nameif command(no PIX model is specified ,refer following URL and the security level parameter description : <A href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/mr.htm#xtocid3" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/mr.htm#xtocid3</A>)</P><P></P><P>Questions : Can you explain the differences between both documentations ?</P><P></P><P></P> Fri, 21 Feb 2020 06:07:13 GMT https://community.cisco.com/t5/network-security/number-of-nameif-commands-with-pix/m-p/93110#M654182 admin_2 2020-02-21T06:07:13Z Re: number of nameif commands with PIX ? https://community.cisco.com/t5/network-security/number-of-nameif-commands-with-pix/m-p/93111#M654198 <HTML><HEAD></HEAD><BODY><P>As far as I now, it is a simple</P><P>documentation mistake (there are </P><P>a few). I installed 7 interfaces</P><P>on a pix535 with pix5.3.1 and</P><P>it worked with all the nameifs.</P><P></P><P></P></BODY></HTML> Wed, 26 Jun 2002 16:33:43 GMT https://community.cisco.com/t5/network-security/number-of-nameif-commands-with-pix/m-p/93111#M654198 2002-06-26T16:33:43Z