topic Re: W2k to PIX Problem in Network Security https://community.cisco.com/t5/network-security/w2k-to-pix-problem/m-p/79422#M655408 <HTML><HEAD></HEAD><BODY><P>Managed to solved the problem. The particular laptop had Norton Internet Security enabled, once I disable it I was able to gain access.</P></BODY></HTML> Tue, 14 May 2002 14:37:57 GMT saluko 2002-05-14T14:37:57Z W2k to PIX Problem https://community.cisco.com/t5/network-security/w2k-to-pix-problem/m-p/79421#M655407 <P>Installed VPN 3.5.1 on a laptop running W2K, when I tried to connect to the PIX it displayed the following message "Remote peer is no longer responding" however it worked on a home PC running W2K and also on WIN 98 laptop/desktop.</P><P></P><P>The problem seem to be on this particular laptop, probably a conflict or something - has anyone experienced this before, if so your advise will be much appreciated. </P><P></P><P>The reason Im convinced is a local problem is because the vpn profile I used on the laptop not working is the same as the vpn profile I imported to the other laptops that are working.</P> Fri, 21 Feb 2020 06:03:45 GMT https://community.cisco.com/t5/network-security/w2k-to-pix-problem/m-p/79421#M655407 saluko 2020-02-21T06:03:45Z Re: W2k to PIX Problem https://community.cisco.com/t5/network-security/w2k-to-pix-problem/m-p/79422#M655408 <HTML><HEAD></HEAD><BODY><P>Managed to solved the problem. The particular laptop had Norton Internet Security enabled, once I disable it I was able to gain access.</P></BODY></HTML> Tue, 14 May 2002 14:37:57 GMT https://community.cisco.com/t5/network-security/w2k-to-pix-problem/m-p/79422#M655408 saluko 2002-05-14T14:37:57Z