topic Problems with access to WS-SVC-IDSM-2 by CLI in Network Security https://community.cisco.com/t5/network-security/problems-with-access-to-ws-svc-idsm-2-by-cli/m-p/1622758#M65567 <P>Hi,</P><P></P><P>I have problems with access to WS-SVC-IDSM-2 because when I try to access by CLI with command session slot 10 processor 1 appears following message:<BR />The default escape character is Ctrl-^, then x.<BR />You can also type 'exit' at the remote prompt to end the session<BR />Trying 127.0.0.101 ... Open</P><P></P><P>[Connection to 127.0.0.101 closed by foreign host]</P><P>Can someone help me with solution a this error?</P><P></P><P>Thanks</P><P></P><P>Ana Maria</P> Sun, 10 Mar 2019 12:16:47 GMT anamaria.fuentes 2019-03-10T12:16:47Z Problems with access to WS-SVC-IDSM-2 by CLI https://community.cisco.com/t5/network-security/problems-with-access-to-ws-svc-idsm-2-by-cli/m-p/1622758#M65567 <P>Hi,</P><P></P><P>I have problems with access to WS-SVC-IDSM-2 because when I try to access by CLI with command session slot 10 processor 1 appears following message:<BR />The default escape character is Ctrl-^, then x.<BR />You can also type 'exit' at the remote prompt to end the session<BR />Trying 127.0.0.101 ... Open</P><P></P><P>[Connection to 127.0.0.101 closed by foreign host]</P><P>Can someone help me with solution a this error?</P><P></P><P>Thanks</P><P></P><P>Ana Maria</P> Sun, 10 Mar 2019 12:16:47 GMT https://community.cisco.com/t5/network-security/problems-with-access-to-ws-svc-idsm-2-by-cli/m-p/1622758#M65567 anamaria.fuentes 2019-03-10T12:16:47Z Re: Problems with access to WS-SVC-IDSM-2 by CLI https://community.cisco.com/t5/network-security/problems-with-access-to-ws-svc-idsm-2-by-cli/m-p/1622759#M65568 <HTML><HEAD></HEAD><BODY><P>Can you please share the output of "show module" from the 6500 switch?</P><P></P><P>Also, have you tried to power off the module from the switch, and reseat the module?</P></BODY></HTML> Fri, 25 Feb 2011 03:31:47 GMT https://community.cisco.com/t5/network-security/problems-with-access-to-ws-svc-idsm-2-by-cli/m-p/1622759#M65568 Jennifer Halim 2011-02-25T03:31:47Z Re: Problems with access to WS-SVC-IDSM-2 by CLI https://community.cisco.com/t5/network-security/problems-with-access-to-ws-svc-idsm-2-by-cli/m-p/1622760#M65569 <HTML><HEAD></HEAD><BODY><P>Hi Jennifer,</P><P></P><P>I will try to reload module from the switch and I will be communicating the result.</P><P></P><P>Thanks for your help</P><P></P><P>Ana Maria</P></BODY></HTML> Fri, 25 Feb 2011 14:18:07 GMT https://community.cisco.com/t5/network-security/problems-with-access-to-ws-svc-idsm-2-by-cli/m-p/1622760#M65569 anamaria.fuentes 2011-02-25T14:18:07Z