topic Re: PIX IDS capabilities in Network Security https://community.cisco.com/t5/network-security/pix-ids-capabilities/m-p/39735#M655975 <HTML><HEAD></HEAD><BODY><P>Unfortunately, no. There is no other way to disable this signature except by excluding them with the "no logging message.." command. If there are 20 signatures that you don't want to see, then you will have 20 "no logging.." statements.</P><P></P><P>Thanks,</P><P></P><P>Chris</P></BODY></HTML> Fri, 26 Apr 2002 20:21:15 GMT chstone 2002-04-26T20:21:15Z PIX IDS capabilities https://community.cisco.com/t5/network-security/pix-ids-capabilities/m-p/39734#M655902 <P>We are using the IDS capabilities built into the pix. I know this is a limited set of signatures but my question is: Is there a way to enable only the 4000xx syslog messages on the PIX so the syslog server only receives those messages without getting all of the other level 4, 3, 2, and 1 messages? I kinow I can use the "no logging message syslog_id" command to disable specific ID's but there are quite a few that I would need to disable in order to only get the IDS signature ID's. Any help would be greatly appreciated.</P> Fri, 21 Feb 2020 06:02:16 GMT https://community.cisco.com/t5/network-security/pix-ids-capabilities/m-p/39734#M655902 m-raft 2020-02-21T06:02:16Z Re: PIX IDS capabilities https://community.cisco.com/t5/network-security/pix-ids-capabilities/m-p/39735#M655975 <HTML><HEAD></HEAD><BODY><P>Unfortunately, no. There is no other way to disable this signature except by excluding them with the "no logging message.." command. If there are 20 signatures that you don't want to see, then you will have 20 "no logging.." statements.</P><P></P><P>Thanks,</P><P></P><P>Chris</P></BODY></HTML> Fri, 26 Apr 2002 20:21:15 GMT https://community.cisco.com/t5/network-security/pix-ids-capabilities/m-p/39735#M655975 chstone 2002-04-26T20:21:15Z