topic Re: How to enable arp proxy on PIX outside interface? in Network Security https://community.cisco.com/t5/network-security/how-to-enable-arp-proxy-on-pix-outside-interface/m-p/74694#M656466 <HTML><HEAD></HEAD><BODY><P>By default, the PIX will proxy-arp for addresses that it owns (globals, statics, etc.) This is always enabled. You cannot configure the PIX to proxy-arp for addresses that it does not own.</P><P></P><P>To disable proxy-arping, you can use the command,</P><P>"sysopt noproxyarp <INTERFACE>"</INTERFACE></P><P></P><P>Sincerely,</P><P></P><P>David.</P><P></P></BODY></HTML> Mon, 01 Apr 2002 16:55:52 GMT David White 2002-04-01T16:55:52Z How to enable arp proxy on PIX outside interface? https://community.cisco.com/t5/network-security/how-to-enable-arp-proxy-on-pix-outside-interface/m-p/74693#M656449 <P>How to enable arp proxy on PIX outside interface?</P><P>Thanks for reply.</P> Fri, 21 Feb 2020 06:00:41 GMT https://community.cisco.com/t5/network-security/how-to-enable-arp-proxy-on-pix-outside-interface/m-p/74693#M656449 xuexinxu 2020-02-21T06:00:41Z Re: How to enable arp proxy on PIX outside interface? https://community.cisco.com/t5/network-security/how-to-enable-arp-proxy-on-pix-outside-interface/m-p/74694#M656466 <HTML><HEAD></HEAD><BODY><P>By default, the PIX will proxy-arp for addresses that it owns (globals, statics, etc.) This is always enabled. You cannot configure the PIX to proxy-arp for addresses that it does not own.</P><P></P><P>To disable proxy-arping, you can use the command,</P><P>"sysopt noproxyarp <INTERFACE>"</INTERFACE></P><P></P><P>Sincerely,</P><P></P><P>David.</P><P></P></BODY></HTML> Mon, 01 Apr 2002 16:55:52 GMT https://community.cisco.com/t5/network-security/how-to-enable-arp-proxy-on-pix-outside-interface/m-p/74694#M656466 David White 2002-04-01T16:55:52Z