pix 501 lost its interface

kuismsu — Fri, 21 Feb 2020 06:16:38 GMT

Hello Could you please help.

I was testing pix 501 for the first time. Upgraded it to 6.21.I got it configured and after booting it, it lost its eth 1 interface. Now it does not come up at all. I would say that interface is broken, but we wer

Here is

Cisco PIX Firewall Version 6.2(1)

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Enabled

Maximum Interfaces: 2

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: 10

Throughput: Limited

IKE peers: 5

Not enough supported network interface cards installed.

PIX requires at least 2 supported interface cards,

but only 1 supported interfaces were found.

Rebooting....

CISCO SYSTEMS PIX-501

Embedded BIOS Version 4.3.200 07/31/01 15:58:22.08

Compiled by morlee

16 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 1022 3000 Host Bridge

00 11 00 8086 1209 Ethernet 9

Cisco Secure PIX Firewall BIOS (4.2) #6: Mon Aug 27 15:09:54 PDT 2001

Platform PIX-501

Flash=E28F640J3 @ 0x3000000

Use BREAK or ESC to interrupt flash boot.

Use SPACE to begin flash boot immediately.

Flash boot interrupted.

Please select an interface from 0 to 0

Ethernet port 1 could not be initialized.

TIA

Susanna

Re: pix 501 lost its interface

bs0000554 — Sun, 29 Sep 2002 23:58:57 GMT

This happens to me with a new PIX 506 when I upgrade it . I think its a hardware problem. Ive upgraded another same and all works fine.

You have to change yours

Re: pix 501 lost its interface

kuismsu — Tue, 22 Oct 2002 07:44:37 GMT

Thank you !

another pix works well with the same ios.

it is indeed a hardware problem

topic Re: pix 501 lost its interface in Network Security

pix 501 lost its interface

Re: pix 501 lost its interface

Re: pix 501 lost its interface