Url-cache not working on Pix 535

riocancontractor — Mon, 11 Mar 2019 18:13:11 GMT

Running 7.22.

url-server (DMZ1) vendor websense host x.x.x.x timeout 10 protocol TCP version 4 connections 5

url-cache dst 128

filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow

url-block url-mempool 1500

url-block url-size 4

PIX535HOFWS# show url-server statistics

Global Statistics:

--------------------

URLs total/allowed/denied 22524/20050/2474

URLs allowed by cache/server 0/20050

URLs denied by cache/server 0/2474

HTTPSs total/allowed/denied 0/0/0

HTTPSs allowed by cache/server 0/0

HTTPSs denied by cache/server 0/0

FTPs total/allowed/denied 0/0/0

FTPs allowed by cache/server 0/0

FTPs denied by cache/server 0/0

Requests dropped 0

Server timeouts/retries 0/0

Processed rate average 60s/300s 6/9 requests/second

Denied rate average 60s/300s 0/0 requests/second

Dropped rate average 60s/300s 0/0 requests/second

Server Statistics:

--------------------

x.x.x.x UP

Vendor websense

Port 15868

Requests total/allowed/denied 22524/20050/2474

Server timeouts/retries 0/0

Responses received 22524

Response time average 60s/300s 0/0

URL Packets Sent and Received Stats:

------------------------------------

Message Sent Received

STATUS_REQUEST 464 464

LOOKUP_REQUEST 22537 22537

LOG_REQUEST 0 NA

Errors:

-------

RFC noncompliant GET method 0

URL buffer update failure 0

URL Filter Cache Stats

----------------------

Size : 128KB

Entries : 219

In Use : 0

Lookups : 9182

Hit Rate : 0

URL blocking is working properly, but Caching isn't. Do I have to do anything on the websense server to enable this? I didn't think so, but not sure why it's not working at all...

Re: Url-cache not working on Pix 535

David White — Sat, 24 Jul 2010 13:42:11 GMT

What version of Websense are you using?

I guess first, I need to explain how caching works. When the PIX sends a request to Websense, in the permit/deny reply there is a field which tells the PIX whether it can cache that response. Only if the field is set to true, and caching is enabled on the PIX, will it cache the replies.

However, in all newer versions of Websense/N2H2, they no longer permit the responses to be cached (meaning the field is set to false in all responses). Therefore, even though the PIX can cache the response, it is not permitted to.

The reason for doing this is because many sites can change classification, or more importantly, sites are very large these days and different areas of sites can be classified to different categories. With caching, the entire domain must be in the same category so the the action taken on the entire domain is the same. This is because only the domain is cached with a permit/deny action, not the entire URL.

Hope that helps explain it. If so, please ensure you mark the question as answered so we know it solved the problem.

Sincerely,

David.

topic Url-cache not working on Pix 535 in Network Security

Url-cache not working on Pix 535

Re: Url-cache not working on Pix 535