Cisco IDS 4215 Error message

dheeraj-vicky — Sun, 10 Mar 2019 12:10:15 GMT

Hi,

I am trying to manage Cisco IDS 4215 with Cisco IPS IME . but on the CLI of IDS i get the below error. Can anyone explain what is this error and how can it be fixed?

2010-10-31 12:21:43,703 [tt] WARN - mysensor eror in init() 404

2010-10-31 12:21:43'718 [q] EROR - addSource() thread initializaton error

2010-10-31 12:21:43,718 [tr] ERROR - 1

Re: Cisco IDS 4215 Error message

fadlouni — Fri, 05 Nov 2010 14:51:48 GMT

Hi.

This error usually means the host PC where IME is installed is interferring with the IME processes and causing them to fail. some common things to check:

1- make sure the PC doesn't have a software firewall running that can cause IME interprocess connections to fail.

2- try re-installing the software as it could be damaged by some other software.

3- make sure communication between IME and the sensor isn't blocked by some device on the path.

4- try a different PC.

5- try to connect to the sensor while you are on the same LAN as the sensor (to rule out some layer 3 device on the path is interferring).

Regards,

Fadi.

topic Re: Cisco IDS 4215 Error message in Network Security

Cisco IDS 4215 Error message

Re: Cisco IDS 4215 Error message