IDSM CPU 1 High Probleme

w.t.kim — Sun, 10 Mar 2019 12:07:02 GMT

Hi everyone.

My name is wan tae kim in korea.

I have the question to idsm problem.
Is using idsm by ips mode in our customer.
Cpu1 will be continued in 100% state but does not know cause.
Is used by Inline mode but need Configuration verification.
I want to receive steers of many persons.

I ask counsel whether take Configuration.

IDSM Configuration:

! ------------------------------
service interface
exit
! ------------------------------
service authentication
exit
! ------------------------------
service event-action-rules rules0
overrides deny-packet-inline
override-item-status Enabled
risk-rating-range 90-100
exit
general
global-overrides-status Enabled
exit
exit
! ------------------------------
service host
network-settings
host-ip x.x.x.x/25,x.x.x.x.

host-name R_Core2_IDSM
telnet-option enabled
access-list x.x.x.0/24
access-list x.x.x.0/24
access-list x.x.x.0/24
access-list x.x.x.x/32
exit
time-zone-settings
offset 540
standard-time-zone-name GMT+09:00
exit
exit
! ------------------------------
service logger
exit
! ------------------------------
service network-access
exit
! ------------------------------
service notification
exit
! ------------------------------
service signature-definition sig0
signatures 2152 0
engine flood-host
rate 100
exit
exit
signatures 5684 2
alert-severity medium
exit
signatures 13003 0
engine traffic-anomaly
event-action produce-alert
exit
exit
signatures 13003 1
engine traffic-anomaly
event-action produce-alert
exit
exit
exit
! ------------------------------
service ssh-known-hosts
exit
! ------------------------------
service trusted-certificates
exit
! ------------------------------
service web-server
exit
! ------------------------------
service anomaly-detection ad0
exit
! ------------------------------
service external-product-interface
exit
! ------------------------------
service analysis-engine
virtual-sensor vs0
description default virtual sensor
physical-interface GigabitEthernet0/7
physical-interface GigabitEthernet0/8
exit

switch Configuration:

monitor session 3 source vlan 305
monitor session 3 destination intrusion-detection-module 9 data-port 1

Thank you.

Re: IDSM CPU 1 High Probleme

Justin Teixeira — Wed, 08 Sep 2010 14:42:47 GMT

Hi Wan Tae Kim,

The 100% CPU utilization is actually expected behavior and should not be cause for concern. To confirm the actual load on the sensor you can use the command:

show stat virt

and check the line "Processing Load Percentage ="

Additionally, you can check the output of:

show int

and verify that the number of "Receive FIFO Overruns" is low/zero, indicating that the sensor is able to keep up with the rate of traffic being sent to it via your SPAN session.

Here are examples of both outputs with the important lines in bold

sensor# show stat virt
Virtual Sensor Statistics
   Statistics for Virtual Sensor vs0
      Name of current Signature-Defintion instance = sig0
      Name of current Event-Action-Rules instance = rules0
      List of interfaces monitored by this virtual sensor = InterfacePair0 subinterface 0,GigabitEthernet0/3 subinterface 0
      General Statistics for this Virtual Sensor
         Number of seconds since a reset of the statistics = 1627117
         MemoryAlloPercent = 31
         MemoryUsedPercent = 31
         MemoryMaxCapacity = 1800000
         MemoryMaxHighUsed = 634880
         MemoryCurrentAllo = 566529
         MemoryCurrentUsed = 561597
         Processing Load Percentage = 1
         Total packets processed since reset = 7875642
         Total IP packets processed since reset = 3782287
         Total IPv4 packets processed since reset = 3755319
         Total IPv6 packets processed since reset = 26968
         Total IPv6 AH packets processed since reset = 0
         Total IPv6 ESP packets processed since reset = 0
         Total IPv6 Fragment packets processed since reset = 0
         Total IPv6 Routing Header packets processed since reset = 0
         Total IPv6 ICMP packets processed since reset = 94
         Total packets that were not IP processed since reset = 4093355
         Total TCP packets processed since reset = 204508
         Total UDP packets processed since reset = 2252490
         Total ICMP packets processed since reset = 14688
         Total packets that were not TCP, UDP, or ICMP processed since reset = 1310601
         Total ARP packets processed since reset = 2923053
         Total ISL encapsulated packets processed since reset = 0
         Total 802.1q encapsulated packets processed since reset = 0
         Total packets with bad IP checksums processed since reset = 0
         Total packets with bad layer 4 checksums processed since reset = 268
         Total number of bytes processed since reset = 1029553988
         The rate of packets per second since reset = 4
         The rate of bytes per second since reset = 632
         The average bytes per packet since reset = 130
      Denied Address Information
         Number of Active Denied Attackers = 0
         Number of Denied Attackers Inserted = 0
         Number of Denied Attacker Victim Pairs Inserted = 0
         Number of Denied Attacker Service Pairs Inserted = 0
         Number of Denied Attackers Total Hits = 0
         Number of times max-denied-attackers limited creation of new entry = 0
         Number of exec Clear commands during uptime = 0
      Denied Attackers and hit count for each.
      Denied Attackers with percent denied and hit count for each.

sensor# show int
Interface Statistics
   Total Packets Received = 29934896
   Total Bytes Received = 4010927826
   Missed Packet Percentage = 0
   Current Bypass Mode = Auto_off
MAC statistics from interface GigabitEthernet0/0
   Interface function = Sensing interface
   Description = Connected to Attacker Switch
   Media Type = TX
   Default Vlan = 0
   Inline Mode = Paired with interface GigabitEthernet0/1
   Pair Status = Up
   Hardware Bypass Capable = No
   Hardware Bypass Paired = N/A
   Link Status = Up
   Admin Enabled Status = Enabled
   Link Speed = Auto_100
   Link Duplex = Auto_Full
   Missed Packet Percentage = 0
   Total Packets Received = 4095925
   Total Bytes Received = 298897396
   Total Multicast Packets Received = 3431616
   Total Broadcast Packets Received = 0
   Total Jumbo Packets Received = 0
   Total Undersize Packets Received = 0
   Total Receive Errors = 0
   Total Receive FIFO Overruns = 0
   Total Packets Transmitted = 664379
   Total Bytes Transmitted = 42520256
   Total Multicast Packets Transmitted = 0
   Total Broadcast Packets Transmitted = 0
   Total Jumbo Packets Transmitted = 0
   Total Undersize Packets Transmitted = 0
   Total Transmit Errors = 0

Best Regards,

Justin

topic Re: IDSM CPU 1 High Probleme in Network Security

IDSM CPU 1 High Probleme

Re: IDSM CPU 1 High Probleme