topic Re: Pix Stateful Failover and 210006 in Network Security https://community.cisco.com/t5/network-security/pix-stateful-failover-and-210006/m-p/50038#M671753 <HTML><HEAD></HEAD><BODY><P>Try changing out the cable with a known good. Also make sure your versions and hardware platforms (and hardware configurations) are identical. </P></BODY></HTML> Mon, 21 Jan 2002 20:59:23 GMT r-simpson 2002-01-21T20:59:23Z Pix Stateful Failover and 210006 https://community.cisco.com/t5/network-security/pix-stateful-failover-and-210006/m-p/50037#M671752 <P>I'm running ver 6.0(1) with stateful failover and the standby has continuous 210006 errors.</P><P></P><P>The "write standby" commands succeeds and "show failover" looks good with the exception of high tcp conn receive errors on the standby.</P><P></P><P>Any suggestions?</P> Fri, 21 Feb 2020 05:57:23 GMT https://community.cisco.com/t5/network-security/pix-stateful-failover-and-210006/m-p/50037#M671752 IPv4Ever 2020-02-21T05:57:23Z Re: Pix Stateful Failover and 210006 https://community.cisco.com/t5/network-security/pix-stateful-failover-and-210006/m-p/50038#M671753 <HTML><HEAD></HEAD><BODY><P>Try changing out the cable with a known good. Also make sure your versions and hardware platforms (and hardware configurations) are identical. </P></BODY></HTML> Mon, 21 Jan 2002 20:59:23 GMT https://community.cisco.com/t5/network-security/pix-stateful-failover-and-210006/m-p/50038#M671753 r-simpson 2002-01-21T20:59:23Z