topic IPS automatic update to E4 engine in Network Security

IPS automatic update to E4 engine

k.abillama — Sun, 10 Mar 2019 11:57:48 GMT

Hi,

Is there a way for the IPS to automatically download the E4 engine through an FTP server like the signature auto update?

I need the answer the the below scnearios

1- upgrade from 7.0(2)E3 to 7.0(2)E4

1- upgrade from 7.0(1)E3 to 7.0(2)E4 -> In this case the whole SP should be downloaded, I doubt this can be done automatically but just in case there is a new way to do it???

Re: IPS automatic update to E4 engine

Jennifer Halim — Mon, 19 Apr 2010 07:10:01 GMT

- Upgrade from 7.0(2)E3 to 7.0(2)E4 can be done automatically through the auto-update from cisco.com. When you perform the signature auto update, it will automatically update the engine to E4.

- Upgrade from 7.0(1)E3 to 7.0(2)E4 needs to be done as per normal upgrade process, ie: download the upgrade package "IPS-K9-7.0-2-E4.pkg", and update the sensor.

Hope that helps.

Re: IPS automatic update to E4 engine

k.abillama — Mon, 19 Apr 2010 07:13:40 GMT

Yes sure it helps, but just to make sure, if it can be done through cisco.com then it can be also done through a hosted FTP server

Actually we are hosting an FTP server on which we are regulary updating the signatures set, we were thinking of downloading the E4 engine as well but I guess we'll have to do it for each Service Pack

Re: IPS automatic update to E4 engine

Jennifer Halim — Mon, 19 Apr 2010 07:19:18 GMT

If you are using FTP server, and if you are already running the latest within that Service Pack, for example: 7.0.2(E3), then you just need to update the engine using this file: IPS-engine-E4-req-7.0-2.pkg

Re: IPS automatic update to E4 engine

k.abillama — Mon, 19 Apr 2010 07:49:38 GMT

Got it thx a lot for your help!

Re: IPS automatic update to E4 engine

Jennifer Halim — Mon, 19 Apr 2010 07:53:42 GMT

Great to hear.

Please always mark question as answered and rate useful post. Thanks.