topic IDSM-2 ports in Network Security https://community.cisco.com/t5/network-security/idsm-2-ports/m-p/1371809#M68029 <P>Hi,</P><P></P><P>I have inserted one IDSM-2 into Catalyst 6509.</P><P></P><P>I key in command "intrusion-detection module 8 data-port 1 trunk allowed-vlan 10 -11" at switch level</P><P></P><P>My question as below,</P><P></P><P>Is data-port 1 = G8/1 at switch level?</P><P>Is data-port 2 = G8/2 at switch level&nbsp; ?</P><P></P><P>Thks in advanced.</P><P></P><P>Regards,</P><P></P><P>Steven Hoo</P> Sun, 10 Mar 2019 11:53:15 GMT wanhwai 2019-03-10T11:53:15Z IDSM-2 ports https://community.cisco.com/t5/network-security/idsm-2-ports/m-p/1371809#M68029 <P>Hi,</P><P></P><P>I have inserted one IDSM-2 into Catalyst 6509.</P><P></P><P>I key in command "intrusion-detection module 8 data-port 1 trunk allowed-vlan 10 -11" at switch level</P><P></P><P>My question as below,</P><P></P><P>Is data-port 1 = G8/1 at switch level?</P><P>Is data-port 2 = G8/2 at switch level&nbsp; ?</P><P></P><P>Thks in advanced.</P><P></P><P>Regards,</P><P></P><P>Steven Hoo</P> Sun, 10 Mar 2019 11:53:15 GMT https://community.cisco.com/t5/network-security/idsm-2-ports/m-p/1371809#M68029 wanhwai 2019-03-10T11:53:15Z Re: IDSM-2 ports https://community.cisco.com/t5/network-security/idsm-2-ports/m-p/1371810#M68030 <HTML><HEAD></HEAD><BODY><P>I'm not sure if the IDSM dataports have 6500 interface assignments (they might).</P><P></P><P>You can see their traffic with the switch command:</P><P>show intrusion-detection module 9 data-port 1 traffic</P><P>and status (showing what VLANS are mapped to waht dataport channel)</P><P>show intrusion-detection module 9 data-port 1 state</P><P></P><P>Or if you were in the IDSM, data-port 1 and 2 appear as</P><P>physical-interface GigabitEthernet0/7</P><P>physical-interface GigabitEthernet0/8</P><P></P><P>- Bob</P></BODY></HTML> Thu, 11 Feb 2010 16:13:49 GMT https://community.cisco.com/t5/network-security/idsm-2-ports/m-p/1371810#M68030 rhermes 2010-02-11T16:13:49Z