Reg: Virtual ip address on the firewall

kuldeep.kaur — Mon, 11 Mar 2019 17:46:50 GMT

Hi Guys,

Need to ask a question on pix. The following ip address is configured on the pix inside interface:

ip address 10.150.255.228 255.255.255.248 standby 10.150.255.229

The routing is configured as

route inside 10.0.0.0 255.0.0.0.0 10.150.255.227

The 10.150.255.227 looks hsrp address to me on the pix. Where can we configured this on the firewall and which command we can use to see this. Or is it assigned by the firewall automatically itself.

Tks

Re: Reg: Virtual ip address on the firewall

Jennifer Halim — Tue, 18 May 2010 02:42:50 GMT

10.150.255.227 is the next hop from the PIX inside interface. It is not an ip address on the PIX itself.

The PIX ip address is 10.150.255.228 for the inside Active ip address. There is no HSRP/standby ip address concept on PIX. The active ip address for inside interface is 10.150.255.228, and if the PIX fails over to the secondary failover pair, the ip address of 10.150.255.228 will also fail over. Whichever is the current Active firewall will have the ip address of 10.150.255.228 for the inside interface.

Hope that helps.

topic Reg: Virtual ip address on the firewall in Network Security

Reg: Virtual ip address on the firewall

Re: Reg: Virtual ip address on the firewall