topic Re: PIX Telnet to outside interface in Network Security https://community.cisco.com/t5/network-security/pix-telnet-to-outside-interface/m-p/62774#M683404 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Make sure that you use "outside" interface of the remote PIX in the crypto ACL, and a symmetrical ACL on the remote PIX.</P><P></P><P>Otherwise, you can use SSH from the outside for telnet (encrypted though).</P><P></P><P>Thanks,</P><P>Afaq</P></BODY></HTML> Tue, 05 Nov 2002 03:49:00 GMT afakhan 2002-11-05T03:49:00Z PIX Telnet to outside interface https://community.cisco.com/t5/network-security/pix-telnet-to-outside-interface/m-p/62773#M683392 <P>Hello,</P><P>I have 2 pix FW's running VPN between them. Now I want to telnet to the outside interface of the remote PIX.</P><P></P><P>On each PIX, Is it as simple as adding a line in the access-list , which is currently used for the NAT0 and in the VPN crypto map, to allow IP from remote PIX (source) to corp LAN (dest) and a similar statement on the local PIX?</P><P></P><P>thanks,</P><P>rrc</P> Fri, 21 Feb 2020 06:21:13 GMT https://community.cisco.com/t5/network-security/pix-telnet-to-outside-interface/m-p/62773#M683392 rcrumm_2 2020-02-21T06:21:13Z Re: PIX Telnet to outside interface https://community.cisco.com/t5/network-security/pix-telnet-to-outside-interface/m-p/62774#M683404 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Make sure that you use "outside" interface of the remote PIX in the crypto ACL, and a symmetrical ACL on the remote PIX.</P><P></P><P>Otherwise, you can use SSH from the outside for telnet (encrypted though).</P><P></P><P>Thanks,</P><P>Afaq</P></BODY></HTML> Tue, 05 Nov 2002 03:49:00 GMT https://community.cisco.com/t5/network-security/pix-telnet-to-outside-interface/m-p/62774#M683404 afakhan 2002-11-05T03:49:00Z