topic Re: How does PIX determine time zones? in Network Security https://community.cisco.com/t5/network-security/how-does-pix-determine-time-zones/m-p/96919#M684351 <HTML><HEAD></HEAD><BODY><P>You can do NTP with ver 6.2.1 This is my CA example:</P><P></P><P>Scaggs</P><P></P><P>Cisco PIX Firewall Version 6.2(1)</P><P>Cisco PIX Device Manager Version 2.0(1)</P><P></P><P>clock timezone PST -8</P><P>clock summer-time PDT recurring</P><P></P><P>ntp authenticate</P><P>ntp server 192.5.41.40 source outside prefer</P><P>ntp server 92.216.191.1 source outside</P></BODY></HTML> Mon, 01 Jul 2002 20:01:36 GMT mike.scaggs 2002-07-01T20:01:36Z How does PIX determine time zones? https://community.cisco.com/t5/network-security/how-does-pix-determine-time-zones/m-p/96917#M684297 <P>We found that we needed to set our PIX time to our time+6 hours in order to get the PDM graphs to indicate correct time. </P><P></P><P>Assuming we in CST are UTC-6, California, PST, would be UTC-8. How does the pix determine which time zone it 'lives in' ?</P><P></P> Fri, 21 Feb 2020 06:07:25 GMT https://community.cisco.com/t5/network-security/how-does-pix-determine-time-zones/m-p/96917#M684297 admin_2 2020-02-21T06:07:25Z Re: How does PIX determine time zones? https://community.cisco.com/t5/network-security/how-does-pix-determine-time-zones/m-p/96918#M684325 <HTML><HEAD></HEAD><BODY><P>The pix has no concept of timezone. If using IPSec and certificates you should set the pix clock to GTM, use the clock set command. The problem with DPM graphs may be in PDM, not the pix. Check the time and zone on the PDM client, if this is OK open a case with the TAC.</P><P></P></BODY></HTML> Wed, 26 Jun 2002 21:16:28 GMT https://community.cisco.com/t5/network-security/how-does-pix-determine-time-zones/m-p/96918#M684325 2002-06-26T21:16:28Z Re: How does PIX determine time zones? https://community.cisco.com/t5/network-security/how-does-pix-determine-time-zones/m-p/96919#M684351 <HTML><HEAD></HEAD><BODY><P>You can do NTP with ver 6.2.1 This is my CA example:</P><P></P><P>Scaggs</P><P></P><P>Cisco PIX Firewall Version 6.2(1)</P><P>Cisco PIX Device Manager Version 2.0(1)</P><P></P><P>clock timezone PST -8</P><P>clock summer-time PDT recurring</P><P></P><P>ntp authenticate</P><P>ntp server 192.5.41.40 source outside prefer</P><P>ntp server 92.216.191.1 source outside</P></BODY></HTML> Mon, 01 Jul 2002 20:01:36 GMT https://community.cisco.com/t5/network-security/how-does-pix-determine-time-zones/m-p/96919#M684351 mike.scaggs 2002-07-01T20:01:36Z