NTP not syncing

nilesh85.sonawane — Fri, 21 Feb 2020 16:50:35 GMT

reference clock and show clock output doesn't match

below is the ntp status , ntp association & show clock

F1# sh ntp associations
address ref clock st when poll reach delay offset disp
*~X.X.X.X 123.108.200.124 3 882 1024 377 67.2 -5.74 17.3
+~X.X.X.X 106.247.248.106 3 939 1024 377 41.1 -5.66 16.2
* master (synced), # master (unsynced), + selected, - candidate, ~ configured

F1# sh ntp status
Clock is synchronized, stratum 4, reference is 10.224.64.100
nominal freq is 99.9984 Hz, actual freq is 100.0119 Hz, precision is 2**6
reference time is e018d46d.f13d754e (13:10:29.942 IST Thu Feb 21 2019)
clock offset is -5.7405 msec, root delay is 235.23 msec
root dispersion is 63.40 msec, peer dispersion is 17.26 msec

F1# sh clock
13:25:19.015 IST Thu Feb 21 2019

Re: NTP not syncing

Marvin Rhoads — Thu, 21 Feb 2019 08:55:09 GMT

What platform are you using?

If it's supported, I recommend you try "clock update-calendar" command in config mode.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/bsm/configuration/15-2mt/bsm-time-calendar-set.html#GUID-C76DE715-EEAB-4DA8-B80C-85B3A5CDA714

topic Re: NTP not syncing in Network Security

NTP not syncing

Re: NTP not syncing