topic Re: ASDM Real-Time Log Viewer does not recieve any messages in Network Security

ASDM Real-Time Log Viewer does not recieve any messages

msje — Mon, 11 Mar 2019 17:48:56 GMT

ASA:8.2(1) ASDM:6.2(5)23

2xASA 5540 Flash 64MB Memory 1024MB

Syslog filter - Internal Buffer = Debugging, ASDM = Debugging, Syslog Servers = Debugging

When I logon to the ASDM, the latest ASDM Syslog messages starts rolling in the gui, but after short time it stops.

If I then start the Real-Time Log Viewer, no messages are displayed.

When I run "sh logging asdm" it is showing me new messages...

I have a failover unit in passive mode, and the "Enable logging on the failover standby unit" set. On this box the Latest ASDM Syslog Messages and Real-Time Log Viewer is working fine 🙂

Does anyone had the same problem and found a solution ?

Re: ASDM Real-Time Log Viewer does not recieve any messages

JORGE RODRIGUEZ — Fri, 21 May 2010 04:05:29 GMT

Hi Marc,

Most likely you are hiting a bug, specially if you have external url filtering in your environment configured in your asa.

See BUG details: ( CSCtb92911 ) ,

http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs

there is a a work around it or use an interim release version shown bellow.

Symptom:

ASDM real-time log viewer freezes occasionally.

Conditions:

ASA is running 8.2.1 version and is configured with [URL-Filtering+HTTP inspection] or ['user-defined' HTTP inspection policy].

Workaround:

The problem seems to be triggered by the syslogs 304001-304005 which display the URLs accessed. By disabling logging these logs, the problem can be mitigated.

ASA(config)#no logging message 304001
ASA(config)#no logging message 304002
ASA(config)#no logging message 304003
ASA(config)#no logging message 304004
ASA(config)#no logging message 304005

Fixed-in

8.2(1.12)
8.2(2)

Regards

Re: ASDM Real-Time Log Viewer does not recieve any messages

msje — Thu, 27 May 2010 13:48:49 GMT

That did not help....

I also removed all my "&" signs in my config, but I still have this error.

I will later update my ASA boxes to 8.3 and then I hope that this error will be gone.

Thanks

Regards

ASDM Real-Time Log Viewer does not recieve any messages

cmorales01 — Tue, 11 Sep 2012 17:24:09 GMT

I have an error because I had configured netflow.

When I activated netflow the asa have a checkbox "Disable redundant syslog messages". This is to avoid send the message via syslog and then via netflow.

The option is in "Configuration > Device Management > Logging > NetFlow"

I have unchecked this option an it start logging for example a simple ping to the asa "Syslog ID 302020" an the pong "Syslog ID 302021"

This was my problem too. I

bascheew — Mon, 21 Jul 2014 21:13:12 GMT

This was my problem too. I have NetFlow enabled and did not uncheck "Disable redundant syslog messages". Thanks for the tip!