topic Multiple Context SNMP Bug? in Network Security

Multiple Context SNMP Bug?

alex.fritzsche — Fri, 21 Feb 2020 16:50:09 GMT

Hi,

SNMP query to admin and context give back sysname admin on both.

snmpwalk -v 2c -c public admin-context-ip sysName

--> gives back "admin"

snmpwalk -v 2c -c public context1-context-ip sysName

-->gives back "admin" but should give back "context1"

someone experiences?

Re: Multiple Context SNMP Bug?

Maykol Rojas — Thu, 21 Feb 2019 00:48:28 GMT

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuv73250/?reffering_site=dumpcr

Re: Multiple Context SNMP Bug?

alex.fritzsche — Tue, 26 Feb 2019 16:22:17 GMT

Hi,

I don't think it's related to that, as my context-user should not know his context-related System context configuration but uses SNMP with his context as it was not a context.

So it's not an enhanement request, but it should normally work to query every context on it's own and not getting the name for the admin-context back.

"sysName" should always give back the context-name, but it gives back the admin-context-name, which is "admin" in our case.

System is 2 Firepower4140 Active/Active multiple context.