topic PIX 515 and Load Balancing in Network Security https://community.cisco.com/t5/network-security/pix-515-and-load-balancing/m-p/8868#M693428 <P>Hi,</P><P>anyone can confirm that PIX 515 support for Load Balancing... so there ada two default route to the different gateway ip address ??</P><P>thanks</P><P></P> Fri, 21 Feb 2020 05:48:27 GMT wongsusanto 2020-02-21T05:48:27Z PIX 515 and Load Balancing https://community.cisco.com/t5/network-security/pix-515-and-load-balancing/m-p/8868#M693428 <P>Hi,</P><P>anyone can confirm that PIX 515 support for Load Balancing... so there ada two default route to the different gateway ip address ??</P><P>thanks</P><P></P> Fri, 21 Feb 2020 05:48:27 GMT https://community.cisco.com/t5/network-security/pix-515-and-load-balancing/m-p/8868#M693428 wongsusanto 2020-02-21T05:48:27Z Re: PIX 515 and Load Balancing https://community.cisco.com/t5/network-security/pix-515-and-load-balancing/m-p/8869#M693442 <HTML><HEAD></HEAD><BODY><P>Stateful packet filtering requires that BOTH inbound and outbound packets transverse the same PIX. You can use two PIX&#146;s in failover mode to eliminate a single point of failure but you&#146;ll have to do any and all load balancing on the outside of the PIX. </P></BODY></HTML> Mon, 25 Jun 2001 19:43:14 GMT https://community.cisco.com/t5/network-security/pix-515-and-load-balancing/m-p/8869#M693442 a-vazquez 2001-06-25T19:43:14Z