topic Re: DMZ server to Internal Database with PIX in Network Security https://community.cisco.com/t5/network-security/dmz-server-to-internal-database-with-pix/m-p/8721#M693454 <HTML><HEAD></HEAD><BODY><P>hi</P><P></P><P>you have to use nat for that data base sever and open the respective port on the firewall.</P><P></P><P>this will solve the problem</P><P></P><P></P><P>regards</P><P>dipankar pal</P></BODY></HTML> Tue, 19 Jun 2001 09:54:41 GMT dipankarpal 2001-06-19T09:54:41Z DMZ server to Internal Database with PIX https://community.cisco.com/t5/network-security/dmz-server-to-internal-database-with-pix/m-p/8720#M693431 <P>Hello, </P><P>My question is based on this scenario. I have a 1720 router with a Web server attached in the DMZ. I need to allow that Web server to access a database on the inside of a PIX 506 firewall. Is there a way to open a connection between the Web server and the database server without compromising the security of the rest of the network? Would be grateful for any suggestions.</P> Fri, 21 Feb 2020 05:48:26 GMT https://community.cisco.com/t5/network-security/dmz-server-to-internal-database-with-pix/m-p/8720#M693431 dgallagher 2020-02-21T05:48:26Z Re: DMZ server to Internal Database with PIX https://community.cisco.com/t5/network-security/dmz-server-to-internal-database-with-pix/m-p/8721#M693454 <HTML><HEAD></HEAD><BODY><P>hi</P><P></P><P>you have to use nat for that data base sever and open the respective port on the firewall.</P><P></P><P>this will solve the problem</P><P></P><P></P><P>regards</P><P>dipankar pal</P></BODY></HTML> Tue, 19 Jun 2001 09:54:41 GMT https://community.cisco.com/t5/network-security/dmz-server-to-internal-database-with-pix/m-p/8721#M693454 dipankarpal 2001-06-19T09:54:41Z