topic Re: could not issue wr mem command in Network Security https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373288#M713608 <HTML><HEAD></HEAD><BODY><P>When the memory utilization goes high then you can't issue write mem?</P><P>We need to figure out what is eating all that memory.&nbsp; Tracking memory usage is a mundane process. I'd suggest opening a TAC case and letting them collect what they need and let you know if this is a known issue and may be upgrade the code accordingly.</P><P></P><P></P><P>-KS</P></BODY></HTML> Fri, 16 Apr 2010 10:28:21 GMT Kureli Sankar 2010-04-16T10:28:21Z could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373282#M713539 <P>i have 5520 ASA ,i am unable to write config in startup ,means it gives error on issuing wr mem command.</P><P>i am able to add or modify the rules</P><P>the cpu usage is showing around 30 % while the memory usage is high above 80% as has 512 memory installed</P> Mon, 11 Mar 2019 17:33:46 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373282#M713539 JEETENDRA BAGALE 2019-03-11T17:33:46Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373283#M713543 <HTML><HEAD></HEAD><BODY><P>What is the error message that you are getting?</P><P>What do you have in flash? Please share "show flash"</P></BODY></HTML> Fri, 16 Apr 2010 10:00:16 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373283#M713543 Jennifer Halim 2010-04-16T10:00:16Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373284#M713545 <HTML><HEAD></HEAD><BODY><P>Pls. run fsck disk0: and then try to write mem.</P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807ea93d.shtml">http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807ea93d.shtml</A></P><P></P><P>-KS</P></BODY></HTML> Fri, 16 Apr 2010 10:12:49 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373284#M713545 Kureli Sankar 2010-04-16T10:12:49Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373285#M713551 <HTML><HEAD></HEAD><BODY><P>I have seen this before. </P><P>try to copy the running config to a new *.cfg file on the disk:0 and then change the config-url location.</P></BODY></HTML> Fri, 16 Apr 2010 10:18:05 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373285#M713551 matt.walls 2010-04-16T10:18:05Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373286#M713573 <HTML><HEAD></HEAD><BODY><P>now i am able to issue wr mem command but the memory utilisation is still high it is about&nbsp; at 85 % constant</P></BODY></HTML> Fri, 16 Apr 2010 10:24:40 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373286#M713573 JEETENDRA BAGALE 2010-04-16T10:24:40Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373287#M713594 <HTML><HEAD></HEAD><BODY><P>Use running-config startup-config to to save configuration to startup (NVRAM)</P><P></P><P>Regards</P><P>Arulkumar</P></BODY></HTML> Fri, 16 Apr 2010 10:25:08 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373287#M713594 arulkumar80 2010-04-16T10:25:08Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373288#M713608 <HTML><HEAD></HEAD><BODY><P>When the memory utilization goes high then you can't issue write mem?</P><P>We need to figure out what is eating all that memory.&nbsp; Tracking memory usage is a mundane process. I'd suggest opening a TAC case and letting them collect what they need and let you know if this is a known issue and may be upgrade the code accordingly.</P><P></P><P></P><P>-KS</P></BODY></HTML> Fri, 16 Apr 2010 10:28:21 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373288#M713608 Kureli Sankar 2010-04-16T10:28:21Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373289#M713620 <HTML><HEAD></HEAD><BODY><P>pls find the attached file can you make anything out from that,it</P><P>is the output of sho proc mem&nbsp; .</P><P>and i was able to issue the command wr mem when my memory utilisation was 83 %</P></BODY></HTML> Fri, 16 Apr 2010 10:38:31 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373289#M713620 JEETENDRA BAGALE 2010-04-16T10:38:31Z Re: could not issue wr mem command https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373290#M713628 <HTML><HEAD></HEAD><BODY><P>You can also try to disable threat-detection and that will free coniguous blocks of memory and you will be able to save it with "wr mem"</P><P></P><P>I hope it helps.</P><P></P><P>PK</P></BODY></HTML> Fri, 16 Apr 2010 22:25:49 GMT https://community.cisco.com/t5/network-security/could-not-issue-wr-mem-command/m-p/1373290#M713628 Panos Kampanakis 2010-04-16T22:25:49Z