topic Re: PIX version 6.1(1) and PDM in Network Security https://community.cisco.com/t5/network-security/pix-version-6-1-1-and-pdm/m-p/30130#M715744 <HTML><HEAD></HEAD><BODY><P>I was having the same problem mentioned above and upgrading the PDM to 1.11 resolved the problem for me.</P></BODY></HTML> Tue, 20 Nov 2001 19:53:26 GMT JoshMiller 2001-11-20T19:53:26Z PIX version 6.1(1) and PDM https://community.cisco.com/t5/network-security/pix-version-6-1-1-and-pdm/m-p/30128#M715705 <P>Hi to all!</P><P>Hope someone can help me, since I upgraded our version from 6.0 to 6.1(1) it's impossible to start the pdm! With the newest version (I know) pdm-111.bin I get the message that pdm only functions with version 6.0. Is there a new version for the pix or what could be wrong? Thanks a lot</P><P>Markus Gratopp</P> Fri, 21 Feb 2020 05:53:36 GMT https://community.cisco.com/t5/network-security/pix-version-6-1-1-and-pdm/m-p/30128#M715705 MGratopp 2020-02-21T05:53:36Z Re: PIX version 6.1(1) and PDM https://community.cisco.com/t5/network-security/pix-version-6-1-1-and-pdm/m-p/30129#M715718 <HTML><HEAD></HEAD><BODY><P>PDM 1.11 (current ver of PDM) will work with 6.1(1).</P><P>Please make sure to reload the PIX after image upgrade from 60 to 611 in order to take a effect. </P><P></P><P>Also if there is any pix/pdm related error please post them too.</P><P></P><P>Thanks,</P><P>Matt</P></BODY></HTML> Tue, 06 Nov 2001 22:32:17 GMT https://community.cisco.com/t5/network-security/pix-version-6-1-1-and-pdm/m-p/30129#M715718 mkaneko 2001-11-06T22:32:17Z Re: PIX version 6.1(1) and PDM https://community.cisco.com/t5/network-security/pix-version-6-1-1-and-pdm/m-p/30130#M715744 <HTML><HEAD></HEAD><BODY><P>I was having the same problem mentioned above and upgrading the PDM to 1.11 resolved the problem for me.</P></BODY></HTML> Tue, 20 Nov 2001 19:53:26 GMT https://community.cisco.com/t5/network-security/pix-version-6-1-1-and-pdm/m-p/30130#M715744 JoshMiller 2001-11-20T19:53:26Z