topic Re: Cisco ASA 5506-X Firepower Device Manager in Network Security

Cisco ASA 5506-X Firepower Device Manager

twstevensuk — Fri, 21 Feb 2020 16:46:32 GMT

How do you change the https port number in Firepower Device Manager

This is a Standalone ASA 5506-x

Cisco Fire Linux OS v6.2.2 (build 11)
Cisco ASA5506-X Threat Defense v6.2.2 (build 81)

Ashish Jhaldiyal — Wed, 06 Feb 2019 16:10:31 GMT

It is not possible to change https port on FDM, Please check this enhancement request.

twstevensuk — Wed, 06 Feb 2019 16:17:12 GMT

Cheers,

Was Tearing my hair out trying to find it

Do you know why this is not Possibe?

What happens if its a Site where it has only 1 Public IP address and you need to forward https?

is their a work around?

Ashish Jhaldiyal — Wed, 06 Feb 2019 16:48:58 GMT

No workaround on FDM, you have to use FMC for this change.

twstevensuk — Wed, 06 Feb 2019 17:02:06 GMT

cheers, what if we were to downgrade the firmware to 6.2.1 or before as the artcile says its for 6.2.2 and above

then upgrade firmware

Ashish Jhaldiyal — Wed, 06 Feb 2019 17:34:12 GMT

I don't think it is supported on 6.2.1 either.